← Look into the faults of the GMC Yukon XL
Trouble code
C0580: possible causes and documented repairs — 2000–2006 GMC Yukon XL
Of the records of the 2000–2006 GMC Yukon XL, 3 state trouble code C0580 (Manufacturer communication: 3). The technical documents say how to deal with 2 of its possible causes. They are listed by the number of matching records, most first.
Narrow it by model year, engine and more
Causes the technical documents say how to deal with (2)
Magnetically Controlled Suspension Electrical Connector: loose or misadjusted
2 matching records
Autoride (Z55) Service Ride Control / Service Suspension System message
No matching record (stated by the technical documents)
On 2009 or earlier vehicles a Service Suspension System message may appear and the rear ride height may be incorrect.
The Electronic Suspension Control module will have DTC C0696 or C0711 set.
How to tell
What to do
- The compressor assembly may need to be removed to see whether the wiring is pinched between the compressor and the frame.
- The module checks level-system pressure at start-up and runs the compressor to add air to the shocks if it is below 10 psi (69 kPa).
- Repair the damaged or shorted circuits and reposition the wiring so it is not damaged again when the compressor is installed.
- The sensor is not serviced separately; install a complete air filter, dryer and sensor assembly.
3 more steps ·All steps, part numbers and sources (3 sources) →
Related symptoms, trouble codes and warning displays
What the technical documents state together with the faults above.
- Symptom
- Warning light
- Warning display
- Service Ride Control / suspension message
Put together by FaultCrate from public records and technical documents. The cause and the repair are for the workshop to decide with the vehicle in front of it. Counts are records, not failure rates.