Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon XL 2000–2006

GMC Yukon XLModel years 2000–2006

Change vehicle →
Clear the search
2 conditions added

Common on this vehicle:Gauge or instrument faultWarning lightLoss of engine power, no accelerationSmoke or fireAir conditioning or heaterStalls or shuts offLeakDoes not start

Record by record

1 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Read the records one by one (1)

ELECTRICAL SYSTEM1

  1. Manufacturer communication2000–2006 GMC YUKON XL ・ 2019-11-12

    Preliminary Information: Vibration Diagnosis Using Pico Oscilloscope

    1. 1Fault

      • Customers complain of vehicle vibration under any of various driving conditions.

    2. 2Finding the cause

      Steps to confirm (in the document’s order)

      1. Drive the vehicle to verify the condition and record a Pico data file of the concern.
      2. Review the Pico file and use it to help determine the root cause or component.

    3. 3Correction

      Repair

      • Repair the vehicle using the Pico information together with any published information relevant to the vibration frequency observed.

      Caution

      • Attempting a vibration repair without knowing the frequency is compared to repairing a check engine light without knowing the stored DTC.
      • 12-03-10-001B is a generic document on the possibility of tire to rim orientation and of the tire slipping on the rim.
      • Component level vibrations such as blower motor, brake pulsation or shudder on turns do not require a Pico file.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：All models, model years 2000 - 2020.
    • Condition：Customers complain of vehicle vibration under any of various driving conditions.
    • Caution：Attempting a vibration repair without knowing the frequency is compared to repairing a check engine light without knowing the stored DTC.
    • Confirm：Drive the vehicle to verify the condition and record a Pico data file of the concern.
    • Confirm：Review the Pico file and use it to help determine the root cause or component.
    • Repair：Repair the vehicle using the Pico information together with any published information relevant to the vibration frequency observed.
    • Caution：12-03-10-001B is a generic document on the possibility of tire to rim orientation and of the tire slipping on the rim.
    • Caution：Component level vibrations such as blower motor, brake pulsation or shudder on turns do not require a Pico file.

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.