GMC Yukon XL 2000–2006
Common on this vehicle:Warning lightStalls or shuts offGauge or instrument faultLeakSmoke or fireFuel smellHard start or long crankMisfire or rough idle
Possible causes
9 causes not drawn
- Castech cylinder head porosity crack (gradual coolant loss)4.8L, 5.3L only0
- Crankshaft position sensor may work intermittently or fail (8.1L V8) - recall 07V-5218.1L only0
- Intake manifold gasket leak (cold idle misfire, lean codes)0
- Single-cylinder misfire (P0300-P0308) and/or chirp, squeak or tick at camshaft speed: worn cam lobe / lifter, valve or valve spring0
- P0300 after engine repairs: injector connectors crossed (cylinders 5-7 / 6-8)0
- Oil leak after cold start from frozen PCV system (rear main seal)0
- Rear bank knock sensor corrosion from water intrusion (P0332)4.8L, 5.3L, 6.0L only0
- Throttle body carbon build-up: idle surge, reduced engine power, throttle DTCs (high mileage)0
- Grease seen at front hub bearing seals (normal purge, do not replace)0
The documents say what to doOnly records name itThe size of a node, the width of a link and the numbers are records matching this search, not likelihoods.
FaultCrate・GMC Yukon XL 2000–2006・Leak, Check engine / Service Engine Soon, Fuel system
Candidate cause (the documents say what to do)
Purge Solenoid: failed
1 of the records matching this search name this component as the cause.
How to tell
P0442Check engine / Service Engine Soon
What to do
No technical document states a check or a repair.
In the records
- Purge Solenoid: replaced 1
See the evidence (0 technical documents, 1 records)
A cause or a result a complaint states is the owner’s view or what a dealer told them, not an established fact.
Put together by FaultCrate from public records and technical documents. The cause and the repair are for the workshop to decide with the vehicle in front of it. Counts are records, not failure rates.