Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon XL 2000–2006

GMC Yukon XLModel years 2000–2006

Change vehicle →
Clear the search
2 conditions added

The vehicle (where a record says)

A record is under an engine, a drive or a series only where it says so: the characters of the vehicle identification number filed with a complaint, its text, or what its document says it applies to. A record that does not say is kept as "not stated". The filed numbers and the documents do not tell 4WD from AWD.

Common on this vehicle:Warning lightLoss of engine power, no accelerationStalls or shuts offMisfire or rough idleLeakNoiseGauge or instrument faultDoes not start

Records

Owner complaint 22Recall 1Manufacturer communication 3558 of 58 open without registering

Records per year (date of the record)

Owner complaintRecallManufacturer communication

2003200520102015202020252026

The 24 records listed below, each on its date (a dot opens its record)

Owner complaintWinding sound from wheel area, fuel smell, ticking after tune-up, stalling and check engine lightEngine ticking after tune-up, stalling while driving, check engine light blinking, and moreCheck engine light illuminated; transmission failure diagnosed
Manufacturer communicationFuel Injection Cleaner Kit Service BulletinFuel Injection Cleaner Kit for DecarbonizingDiagnostic tip: valve, lifter or camshaft issueDiagnostic tip on valve, lifter or camshaft issuesEVAP Leak Diagnostic Service Bulletin (DTCs P0442/P0455)MIL Illuminated with Fuel Trim and Oxygen Sensor CodesInduction System Icing Inspection in Cold Ambient TemperaturesMisfire and DTC Code Diagnostic Information NotificationFuel Injection Cleaner Kit Technical BulletinMisfire and DTC Code Preliminary Information for TAC DiagnosisDiagnostic tip: valve, lifter or camshaft issue diagnosisInduction System Icing Inspection in Cold TemperaturesInduction System Icing InspectionDiagnostic tip: Valve, lifter and camshaft issue diagnosisInduction System Icing Inspection CommunicationInduction System Icing Inspection in Cold TemperaturesMisfire and DTC Codes Diagnostic InformationIP to Body Harness Connector Repair for MIL and DTC P2138Throttle Position Sensor Cover ReplacementThrottle Position Sensor Cover ReplacementInduction System Icing Issues in Cold Temperatures

2018-02-212024-07-16

  1. Manufacturer communicationDate 2024-07-16

    Fuel Injection Cleaner Kit Service Bulletin

    2000 GMC YUKON XL、2000 GMC YUKON XL 1500、2000 GMC YUKON XL 2500 … ＋75 other vehicles / years

    MIL

    This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should

  2. Manufacturer communicationDate 2024-03-19

    Fuel Injection Cleaner Kit for Decarbonizing

    2000 GMC YUKON XL、2000 GMC YUKON XL 1500、2000 GMC YUKON XL 2500 … ＋83 other vehicles / years

    MIL

    This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels shou

  3. Manufacturer communicationDate 2023-05-06

    Diagnostic tip: valve, lifter or camshaft issue

    2002 GMC YUKON XL、2002 GMC YUKON XL 1500、2002 GMC YUKON XL 2500 … ＋65 other vehicles / years

    MIL

    This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.

  4. Manufacturer communicationDate 2023-04-13

    Diagnostic tip on valve, lifter or camshaft issues

    2002 GMC YUKON XL、2002 GMC YUKON XL 1500、2002 GMC YUKON XL 2500 … ＋65 other vehicles / years

    Malfunction Indicator

    This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.

  5. Manufacturer communicationDate 2023-01-06

    EVAP Leak Diagnostic Service Bulletin (DTCs P0442/P0455)

    2000 GMC YUKON XL、2000 GMC YUKON XL 1500、2000 GMC YUKON XL 2500 … ＋74 other vehicles / years

    MIL

    This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.

  6. Manufacturer communicationDate 2022-09-07

    MIL Illuminated with Fuel Trim and Oxygen Sensor Codes

    2000 GMC YUKON XL、2000 GMC YUKON XL 1500、2000 GMC YUKON XL 2500 … ＋74 other vehicles / years

    MIL

    This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.

  7. Manufacturer communicationDate 2021-04-19

    Induction System Icing Inspection in Cold Ambient Temperatures

    2000 GMC YUKON XL、2001 GMC YUKON XL、2002 GMC YUKON XL … ＋49 other vehicles / years

    DTC

    This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component

  8. Manufacturer communicationDate 2020-11-16

    Misfire and DTC Code Diagnostic Information Notification

    2000 GMC YUKON XL、2001 GMC YUKON XL、2002 GMC YUKON XL … ＋49 other vehicles / years

    DTC

    This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D

  9. Manufacturer communicationDate 2020-06-22

    Fuel Injection Cleaner Kit Technical Bulletin

    2000 GMC YUKON XL、2000 GMC YUKON XL 1500、2000 GMC YUKON XL 2500 … ＋50 other vehicles / years

    MIL

    This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels shou

  10. Manufacturer communicationDate 2020-06-15

    Misfire and DTC Code Preliminary Information for TAC Diagnosis

    2000 GMC YUKON XL、2001 GMC YUKON XL、2002 GMC YUKON XL … ＋49 other vehicles / years

    DTC

    This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D

  11. Manufacturer communicationDate 2020-04-06

    Diagnostic tip: valve, lifter or camshaft issue diagnosis

    2002 GMC YUKON XL、2003 GMC YUKON XL、2004 GMC YUKON DENALI XL … ＋40 other vehicles / years

    DTC

    This diagnostic tip provides additional information on how to diagnose a possible valve, lifter or camshaft issue.

  12. Manufacturer communicationDate 2020-02-10

    Induction System Icing Inspection in Cold Temperatures

    2000 GMC YUKON XL、2001 GMC YUKON XL、2002 GMC YUKON XL … ＋49 other vehicles / years

    DTC

    This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component

  13. Manufacturer communicationDate 2019-11-12

    Induction System Icing Inspection

    2000 GMC YUKON XL、2001 GMC YUKON XL、2002 GMC YUKON XL … ＋49 other vehicles / years

    DTC

    This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component

  14. Manufacturer communicationDate 2019-10-28

    Diagnostic tip: Valve, lifter and camshaft issue diagnosis

    2002 GMC YUKON XL、2003 GMC YUKON XL、2004 GMC YUKON DENALI XL … ＋40 other vehicles / years

    Malfunction Indicator

    This diagnostic tip provides additional information on how to diagnose a possible valve, lifter or camshaft issue.

  15. Manufacturer communicationDate 2019-03-18

    Induction System Icing Inspection Communication

    2000 GMC YUKON XL、2001 GMC YUKON XL、2002 GMC YUKON XL … ＋61 other vehicles / years

    DTC

    This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component

  16. Manufacturer communicationDate 2019-03-11

    Induction System Icing Inspection in Cold Temperatures

    2000 GMC YUKON XL、2001 GMC YUKON XL、2002 GMC YUKON XL … ＋63 other vehicles / years

    DTC

    This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component

  17. Manufacturer communicationDate 2019-03-11

    Misfire and DTC Codes Diagnostic Information

    2000 GMC YUKON XL、2001 GMC YUKON XL、2002 GMC YUKON XL … ＋49 other vehicles / years

    DTC

    This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D

  18. Owner complaintDate 2018-11-19

    Winding sound from wheel area, fuel smell, ticking after tune-up, stalling and check engine light

    2005 GMC YUKON XL

    CHECK ENGINE

    WHILE DRIVING I HEAR A WINDING SOUND COMING FROM WHEEL AREA WHILE DRIVING I SMELL FUEL THAT COMES AND GOES RECENTLY HAD FULL TUNE UP NOW CAR STARTS TO TICK AFTER A WHILE OF DRIVING OR EVEN PRESSING ON GAS WHILE IN PARK IT STOPS WHILE DRIVIN

  19. Owner complaintDate 2018-11-19

    Engine ticking after tune-up, stalling while driving, check engine light blinking, and more

    2005 GMC YUKON XL

    CHECK ENGINE

    AFTER GETTING FULL TUNE UP MY ENGINE STARTS TICKING WHEN I START MY MY CAR AFTER A WHILE OF DRIVING THE TICKING STOPS CAR STALLS WHILE DRIVING AND CHECK ENGINE BLINKS ON AND OFF . ALREADY CHANGED COILS FROM INSTRUCTED READ STILL GET STALLI

  20. Owner complaintDate 2018-11-06

    Check engine light illuminated; transmission failure diagnosed

    2004 GMC YUKON XL

    CHECK ENGINE

    TL* THE CONTACT OWNS A 2004 GMC YUKON XL. WHILE DRIVING 60 MPH, THE CHECK ENGINE WARNING INDICATOR ILLUMINATED. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE TRANSMISSION FAILED AND NEEDED TO BE REPLACED.

  21. Manufacturer communicationDate 2018-06-04

    IP to Body Harness Connector Repair for MIL and DTC P2138

    2005 GMC YUKON DENALI XL、2005 GMC YUKON XL、2006 GMC YUKON DENALI XL … ＋17 other vehicles / years

    Malfunction Indicator

    This technical bulletin provides repair information for repairing the IP to body harness connector to correct a customer concern for intermittent Malfunction Indicator Lamp (MIL) illuminated with Reduced Engine Power displayed and DTC P2138

  22. Manufacturer communicationDate 2018-05-21

    Throttle Position Sensor Cover Replacement

    2005 GMC YUKON DENALI XL、2005 GMC YUKON XL ＋13 other vehicles / years

    DTC

    This technical bulletin provides a procedure for replacing the throttle position sensor cover for concerns regarding a indicator lamp illuminated reduced power message displayed and DTC P2135 set.

  23. Manufacturer communicationDate 2018-05-21

    Throttle Position Sensor Cover Replacement

    2005 GMC YUKON DENALI XL、2005 GMC YUKON XL ＋13 other vehicles / years

    DTC

    This technical bulletin provides a procedure for replacing the throttle position sensor cover for concerns regarding a indicator lamp illuminated reduced power message displayed and DTC P2135 set.

  24. Manufacturer communicationDate 2018-02-21

    Induction System Icing Issues in Cold Temperatures

    2000 GMC YUKON XL、2001 GMC YUKON XL、2002 GMC YUKON XL … ＋49 other vehicles / years

    DTC

    This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component