Skip to content
FaultCrate

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

GMC Yukon XLModel years 2000–2006

Change vehicle →

← All known issues

BrakesModel years 2000–2005Manufacturer

ABS lamp with DTC C0265 (EBCM motor relay circuit) after EBCM replacement

GMC Yukon Models 2000 - 2005 (among listed trucks and SUVs)

After replacing the EBCM, DTC C0265 "EBCM Motor Relay Circuit" may be present.

A dealer may have replaced multiple EBCMs without resolving it.

There is an issue with the relay solder connection to the circuit board.

How to tell

What to do

No technical document states a check or a repair.

What is needed

Parts and materials
Not stated
Labor time
Not stated
Special tools
Not stated
Scan tool
Not stated

Only what the technical documents state. "Not stated" does not mean not needed.

Caution

  • An EBCM obtained from another dealer may also set C0265.

Applies to

  • The bulletin lists GMC Yukon Models 2000 - 2005.
See the evidence (1 documents, 5 passages)
DocumentPublisherDate
[1]PIT5669A: ABS MIL with DTC C0265 ↗
ManufacturerGeneral Motors (published by NHTSA)
2019-04-18
  • Applies toThe bulletin lists GMC Yukon Models 2000 - 2005.

    GMC Yukon Models 2000 - 2005 All All All All— [1] Models
  • First signsAfter replacing the EBCM, DTC C0265 "EBCM Motor Relay Circuit" may be present.

    after replacing the EBCM they have a DTC C0265 "EBCM Motor Relay Circuit."— [1] Condition
  • First signsA dealer may have replaced multiple EBCMs without resolving it.

    A dealer may have also replaced multiple EBCM's without resolve.— [1] Condition
  • Why it happensThere is an issue with the relay solder connection to the circuit board.

    an issue with the relay's solder connection to the circuit board.— [1] Condition
  • CautionAn EBCM obtained from another dealer may also set C0265.

    If a dealer obtains a part from another dealer, it may also set the C0265— [1] Correction

Records under this issue 0

No record matches