Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
2 conditions added

Common on this vehicle:Warning lightLeakNoiseVibration or shudderMisfire or rough idleGauge or instrument faultAir conditioning or heaterCorrosion or rust

Record by record

1 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Read the records one by one (1)

VISIBILITY1

  1. Manufacturer communication2005–2006 GMC YUKON DENALI ・ 2017-08-15

    Wiper Blade Care Information Bulletin

    1. 1Fault

    2. 2Finding the cause

      Possible causes

      • Most wiper performance concerns come from dirty blades, damaged blades, or worn out blades used beyond their useful life.
      • Heat and time can give the rubber a permanent set so it no longer flexes and turns over uniformly, which may cause streaking or unwiped areas.
      • Ice can form in the pin joints of the wipers and cause streaking and unwiped areas.
      • The variation in friction these products leave on the glass makes the wipers chatter and wear prematurely.

      Steps to confirm (in the document’s order)

      • Inspect the rubber blades every 4-6 months or 12,000 km (7,500 mi) for wear, cracking or contamination.

    3. 3Correction

      Repair

      1. If the blades do not clear the glass, clean the windshield and the rubber blades; if that does not correct it, replace the rubber elements.
      2. Clean the rubber blades with a lint free cloth or paper towel soaked with windshield washer fluid or a mild detergent.

      Parts

      • For exterior glass cleaning the bulletin suggests Vehicle Care Glass Cleaner, P/N 19287404 (18 oz) or 19259280 (6 oz) (in Canada, 88865156).

      Part numbers printed in the document

      The numbers are as the document prints them. The name and the replacing number are what the pages of GMPartsGiant, a reseller of genuine parts and not GM, state. Aftermarket equivalents are not checked here (the links only search by number). Confirm the fit for the vehicle (VIN) before ordering.

      Caution

      • Do not clean wiper blades with gasoline, kerosene or petroleum based products.
      • GM does not recommend spray on / wipe on windshield treatments or washer fluid additives.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：Applies to 2015 and prior GM passenger cars and trucks.
    • Cause：Most wiper performance concerns come from dirty blades, damaged blades, or worn out blades used beyond their useful life.
    • Confirm：Inspect the rubber blades every 4-6 months or 12,000 km (7,500 mi) for wear, cracking or contamination.
    • Repair：If the blades do not clear the glass, clean the windshield and the rubber blades; if that does not correct it, replace the rubber elements.
    • Repair：Clean the rubber blades with a lint free cloth or paper towel soaked with windshield washer fluid or a mild detergent.
    • Caution：Do not clean wiper blades with gasoline, kerosene or petroleum based products.
    • Cause：Heat and time can give the rubber a permanent set so it no longer flexes and turns over uniformly, which may cause streaking or unwiped areas.
    • Cause：Ice can form in the pin joints of the wipers and cause streaking and unwiped areas.
    • Caution：GM does not recommend spray on / wipe on windshield treatments or washer fluid additives.
    • Cause：The variation in friction these products leave on the glass makes the wipers chatter and wear prematurely.
    • Parts：For exterior glass cleaning the bulletin suggests Vehicle Care Glass Cleaner, P/N 19287404 (18 oz) or 19259280 (6 oz) (in Canada, 88865156).

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This informational bulletin explains how to care for wiper blades.