Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
2 conditions added

Common on this vehicle:NoiseWarning lightCorrosion or rustLeakMisfire or rough idleAir conditioning or heaterReduced brakingLights (headlights, turn signals)

Record by record

22 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Symptom

Component named as the cause

Work done

A ribbon is as wide as the records that state both of its ends (only the commonest are drawn). A record that names several symptoms or components runs through each. Orange is records that say the fault came back or was not fixed. Results come from owners’ reports only; one that does not say is “result not stated”. None of this is a likelihood of a cause or a rate at which work succeeds.

Read the records one by one (16)

POWER TRAIN6

  1. Manufacturer communication2000–2006 GMC YUKON DENALI ・ 2008-04-07

    Eaton Locking Differential Chatter Shudder Noise on Turns (RPO G80)

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

      EATON LOCKING DIFFERENTIAL CHATTER SHUDDER NOISE ON TURNS, EQUIPPED WITH A LOCKING REAR DIFFERENTIAL RPO G80. *NJ UPDATED 7/17/2008. *PE

    Read the sentences of the record
    Remedy
    EATON LOCKING DIFFERENTIAL CHATTER SHUDDER NOISE ON TURNS, EQUIPPED WITH A LOCKING REAR DIFFERENTIAL RPO G80. *NJ UPDATED 7/17/2008. *PE

  2. Manufacturer communication2000–2005 GMC YUKON ・ 2005-04-21

    4WD Models with Noise, Vibration on Dry Pavement

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      4WD MODELS WITH NOISE, VIBRATION ON DRY PAVEMENT. *EH

    Read the sentences of the record
    Remedy
    4WD MODELS WITH NOISE, VIBRATION ON DRY PAVEMENT. *EH

  3. Manufacturer communication2000–2005 GMC YUKON DENALI ・ 2004-11-03

    NVG149 NP3 Transfer Case Bind or Shudder on Turns

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

      NVG149 NP3 TRANSFER CASE MAY EXHIBIT A BIND OR SHUDDER ON TURNS. *TC

    Read the sentences of the record
    Remedy
    NVG149 NP3 TRANSFER CASE MAY EXHIBIT A BIND OR SHUDDER ON TURNS. *TC

  4. Manufacturer communication2000–2002 GMC YUKON ・ 2004-08-23

    NVG Transfer Case Vibration/Shudder at Low Speed Turns

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

      THE NVG 136 ALL WHEEL DRIVE (AWD) TRANSFER CASE AND THE 236 AND 246 NVG SELECTABLE TRANSFER CASES OPERATING IN THE AUTO MODE MAY EXHIBIT A CONDITION OF A VIBRATION/SHUDDER DURING LOW SPEED TURNS SUCH AS A PARKING LOT MANEUVER, UP TO APPROXIMATELY 5 MPH (= 8.05 km/h). *TT 3012A NOT YET RECEIVED. *TT

    Read the sentences of the record
    Remedy
    THE NVG 136 ALL WHEEL DRIVE (AWD) TRANSFER CASE AND THE 236 AND 246 NVG SELECTABLE TRANSFER CASES OPERATING IN THE AUTO MODE MAY EXHIBIT A CONDITION OF A VIBRATION/SHUDDER DURING LOW SPEED TURNS SUCH AS A PARKING LOT MANEUVER, UP TO APPROXIMATELY 5 MPH (= 8.05 km/h). *TT 3012A NOT YET RECEIVED. *TT

  5. Manufacturer communication2000–2002 GMC YUKON ・ 2003-04-15

    4-Wheel Drive Slips, Noise, Vibration, Leaks, Hot Odor Notice

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      SLIPS IN 4-WHEEL DRIVE, NOISE, VIBRATION, LEAKS, HOT ODOR. *TT

    Read the sentences of the record
    Remedy
    SLIPS IN 4-WHEEL DRIVE, NOISE, VIBRATION, LEAKS, HOT ODOR. *TT

  6. Manufacturer communication2000–2002 GMC YUKON ・ 2002-10-10

    4-Wheel Drive Transfer Case Performance Issues Communication

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

      SOME VEHICLES WILL NOT MOVE WHEN 4-WHEEL DRIVE IS REQUESTED, NOISE, SHUDDER, POOR PERFORMANCE, TRANSMISSION / TRANSFER CASE SLIPS, TRANSMISSION WILL NOT UPSHIFT, SLIPS IN 4-WHEEL DRIVE. *TT

    Read the sentences of the record
    Remedy
    SOME VEHICLES WILL NOT MOVE WHEN 4-WHEEL DRIVE IS REQUESTED, NOISE, SHUDDER, POOR PERFORMANCE, TRANSMISSION / TRANSFER CASE SLIPS, TRANSMISSION WILL NOT UPSHIFT, SLIPS IN 4-WHEEL DRIVE. *TT

ENGINE AND ENGINE COOLING2

  1. Manufacturer communication2001–2006 GMC YUKON DENALI ・ 2018-06-04

    Engine Squealing Type Noise on Start-up or Vibration

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      Repair

      • Inspect the crankshaft balancer for an outer ring slipping on the center hub; if found, replace the crankshaft balancer.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：Applies to the listed models equipped with the 3.5L or 3.9L engine (RPOs LZ4, LZE, LZ8, LGD, LZ9, LZG, LX9).
    • Repair：Inspect the crankshaft balancer for an outer ring slipping on the center hub; if found, replace the crankshaft balancer.

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This informational bulletin provides information for Engine Squealing Type Noise on Start-up or Vibration Condition.

  2. Manufacturer communication2000–2005 GMC YUKON ・ 2004-11-04

    Exhaust Vibration Resonance or Moan (2004-2005 GMC Denali)

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      EXHAUST VIBRATION RESONANCE OR MOAN. (2004-2005 GMC DENALI) *SC

    Read the sentences of the record
    Remedy
    EXHAUST VIBRATION RESONANCE OR MOAN. (2004-2005 GMC DENALI) *SC

EQUIPMENT2

  1. Manufacturer communication2000–2006 GMC YUKON DENALI ・ 2018-05-21(1 earlier editions of this document folded here)

    Wheel Installation and Torque Techniques

    1. 1Fault

      • Vibration in the steering wheel or seat centered at 10-14 Hz, between 93-115 km/h (58-72 mph).

    2. 2Finding the cause

      Possible causes

      • Wrong wheel torque methods can mount the wheel and tire assembly off center, so its mass "orbits" the hub axis and vibrates like a tire with high RFV or an imbalance.

    3. 3Correction

      Repair

      1. Remove the tire and wheel assemblies, index them at least two stud positions from where they were, and reinstall them.
      2. With the wheel off the ground, install all lug nuts hand tight using only a socket.
      3. Snug all lug nuts in a star or criss-cross pattern with a hand wrench.
      4. Lower the vehicle until the tire has just enough contact to resist turning, then torque to specification with a torque wrench.

      Caution

      • This first order tire/wheel vibration may be misdiagnosed as wheel imbalance or excessive tire radial force variation.
      • Improper torque may also distort the brake rotor.
      • Do not use torque sticks or an impact driver to tighten wheel lug nuts.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：Applies to 2006-2013 GM passenger cars and light duty trucks.
    • Condition：Vibration in the steering wheel or seat centered at 10-14 Hz, between 93-115 km/h (58-72 mph).
    • Cause：Wrong wheel torque methods can mount the wheel and tire assembly off center, so its mass "orbits" the hub axis and vibrates like a tire with high RFV or an imbalance.
    • Caution：This first order tire/wheel vibration may be misdiagnosed as wheel imbalance or excessive tire radial force variation.
    • Caution：Improper torque may also distort the brake rotor.
    • Repair：Remove the tire and wheel assemblies, index them at least two stud positions from where they were, and reinstall them.
    • Caution：Do not use torque sticks or an impact driver to tighten wheel lug nuts.
    • Repair：With the wheel off the ground, install all lug nuts hand tight using only a socket.
    • Repair：Snug all lug nuts in a star or criss-cross pattern with a hand wrench.
    • Repair：Lower the vehicle until the tire has just enough contact to resist turning, then torque to specification with a torque wrench.

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This informational bulletin provides a description of the proper wheel installation and proper wheel torque techniques used to install wheels onto vehicles

  2. Manufacturer communication2000–2006 GMC YUKON DENALI ・ 2017-08-15(1 earlier editions of this document folded here)

    Abnormal Noise or Vibration Investigation Preliminary Information

    1. 1Fault

      • The customer notices a noise or vibration that seems abnormal and may not have been there when the vehicle was new.

    2. 2Finding the cause

      Possible causes

      • Step bars/nerf bars that touch both the truck frame and the cab without insulation carry the noise of a normally operating drive train into the passenger area.
      • Other known contributors are running boards, bug shields, sun visors, vent shades, emergency lights, custom grilles, ski racks and bicycle racks.

      Steps to confirm (in the document’s order)

      1. The first diagnostic step is to evaluate the vehicle for any after-market accessories.
      2. These items must be removed to evaluate whether they contribute to the concern.

    3. 3Correction

      Caution

      • If the root cause is a non-GM aftermarket accessory, no warranty claim should be filed; it is a customer pay item.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：Applies to 2013 and prior passenger cars and light duty trucks, including Saab and Saturn.
    • Condition：The customer notices a noise or vibration that seems abnormal and may not have been there when the vehicle was new.
    • Confirm：The first diagnostic step is to evaluate the vehicle for any after-market accessories.
    • Cause：Step bars/nerf bars that touch both the truck frame and the cab without insulation carry the noise of a normally operating drive train into the passenger area.
    • Cause：Other known contributors are running boards, bug shields, sun visors, vent shades, emergency lights, custom grilles, ski racks and bicycle racks.
    • Confirm：These items must be removed to evaluate whether they contribute to the concern.
    • Caution：If the root cause is a non-GM aftermarket accessory, no warranty claim should be filed; it is a customer pay item.

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This Preliminary Information communication advises the technician that a noise or a vibration in the vehicle that seems to be abnormal may not have been there when the vehicle was purchased. Technician should look for Non - General Motors aftermarket accessories installed on the vehicle that can cause these issues.

SUSPENSION2

  1. Manufacturer communication2000–2005 GMC YUKON DENALI ・ 2004-08-25

    Rear Axle Locking Differential Chatter Shudder Noise on Turns

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

      REAR AXLE LOCKING DIFFERENTIAL CHATTER SHUDDER NOISE ON TURNS. *MJ

    Read the sentences of the record
    Remedy
    REAR AXLE LOCKING DIFFERENTIAL CHATTER SHUDDER NOISE ON TURNS. *MJ

  2. Manufacturer communication2002–2006 GMC YUKON ・ 2003-04-09

    Tire Bead Splits and Wheel Vibration Service Communication

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

    Read the sentences of the record
    Remedy
    TIRE SLOWLY GOES FLAT AND/OR EXCESSIVE WHEEL VIBRATION CAUSED BY BEAD SPLITS (REPLACE WHEELS WITH NEW HEAVY DUTY RIM VERSION) *TT *AR UPDATED 4/11/08. *NJ

STEERING1

  1. Manufacturer communication2000–2006 GMC YUKON ・ 2005-04-21

    Steering Assist or Shudder During Low-Speed Maneuvers

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      LACK OF STEERING ASSIST OR SHUDDER DURING PARKING LOT TYPE MANEUVERS. *TT

    Read the sentences of the record
    Remedy
    LACK OF STEERING ASSIST OR SHUDDER DURING PARKING LOT TYPE MANEUVERS. *TT

STRUCTURE1

  1. Manufacturer communication2000–2006 GMC YUKON DENALI ・ 2017-08-15(1 earlier editions of this document folded here)

    Preliminary Information - Vibration Diagnosis Using Pico Oscilloscope

    1. 1Fault

      • Customer vibration complaints are among the most challenging to diagnose and repair accurately.

    2. 2Finding the cause

      Steps to confirm (in the document’s order)

      1. Drive the vehicle to verify the condition and record a Pico data file of the concern.
      2. Review the Pico file and use it to help determine the root cause or component.

    3. 3Correction

      Repair

      • Repair the vehicle using the Pico information together with any published information relevant to the vibration frequency observed.

      Caution

      • Without knowing the vibration frequency, repair attempts are just spinning wheels.
      • Component level vibrations such as blower motor, brake pulsation or shudder on turns do not require a Pico file; the requirement is for vehicle level vibration complaints.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：Applies to all 2000 and newer GM vehicles.
    • Condition：Customer vibration complaints are among the most challenging to diagnose and repair accurately.
    • Caution：Without knowing the vibration frequency, repair attempts are just spinning wheels.
    • Confirm：Drive the vehicle to verify the condition and record a Pico data file of the concern.
    • Confirm：Review the Pico file and use it to help determine the root cause or component.
    • Repair：Repair the vehicle using the Pico information together with any published information relevant to the vibration frequency observed.
    • Caution：Component level vibrations such as blower motor, brake pulsation or shudder on turns do not require a Pico file; the requirement is for vehicle level vibration complaints.

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.

UNKNOWN OR OTHER1

  1. Manufacturer communication2001–2006 GMC YUKON DENALI ・ 2025-07-23(3 earlier editions of this document folded here)

    TAC diagnostic assistance pico file requirement

    1. 1Fault

      • Vehicle vibration under any of various driving conditions.

    2. 2Finding the cause

      Possible causes

      • Vibration could be caused by many various components and conditions.

      Steps to confirm (in the document’s order)

      • Drive the vehicle to verify the condition and record a Pico data file of the concern.

    3. 3Correction

      Repair

      • Repair the vehicle using the Pico information along with any published information relevant to the vibration frequency observed.

      Caution

      • Just as a check engine light is not repaired without knowing the stored DTC, a vibration should not be repaired without knowing its frequency.
      • Bulletin 12-03-10-001B is a generic document about tire to rim orientation and the tire slipping on the rim.
      • Component level vibrations such as a blower motor, brake pulsation or shudder on turns do not require a Pico file.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：Applies to all 2000 to 2026 models.
    • Condition：Vehicle vibration under any of various driving conditions.
    • Cause：Vibration could be caused by many various components and conditions.
    • Caution：Just as a check engine light is not repaired without knowing the stored DTC, a vibration should not be repaired without knowing its frequency.
    • Confirm：Drive the vehicle to verify the condition and record a Pico data file of the concern.
    • Repair：Repair the vehicle using the Pico information along with any published information relevant to the vibration frequency observed.
    • Caution：Bulletin 12-03-10-001B is a generic document about tire to rim orientation and the tire slipping on the rim.
    • Caution：Component level vibrations such as a blower motor, brake pulsation or shudder on turns do not require a Pico file.

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.

WHEELS1

  1. Manufacturer communication2002–2003 GMC YUKON ・ 2003-07-24

    Tire Air Pressure Loss and Wheel Vibration on Six Bolt Steel Wheels

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

      TIRE AIR PRESSURE LOSE AND/OR EXCESSIVE WHEEL VIBRATION CONDITION ON MODELS WITH SIX BOLT 16X6-1/2 FULL-FACE STEEL WHEELS. *TT *JB

    Read the sentences of the record
    Remedy
    TIRE AIR PRESSURE LOSE AND/OR EXCESSIVE WHEEL VIBRATION CONDITION ON MODELS WITH SIX BOLT 16X6-1/2 FULL-FACE STEEL WHEELS. *TT *JB

Showing 16 of the 22 you can open. Narrow the search to see the rest.