Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
Add conditions (optional: symptom, model year, system, warning display, trouble code, kind of record)

Common on this vehicle:Reduced brakingLeakCorrosion or rustABS activates (at low speed and the like)Parking brake

remedyMaster CylinderRemove

Record by record

5 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Symptom

Component named as the cause

Work done

How it is said to have ended

  • says it came back3
  • says it did not fix it3
  • result not stated2

A ribbon is as wide as the records that state both of its ends (only the commonest are drawn). A record that names several symptoms or components runs through each. Orange is records that say the fault came back or was not fixed. Results come from owners’ reports only; one that does not say is “result not stated”. None of this is a likelihood of a cause or a rate at which work succeeds.

Read the records one by one (5)

Known issuesBrake pipe (brake line) corrosion and rupture2

  1. Owner complaint2002 GMC YUKON ・ 2015-04-20

    Brake failure with ABS activation and brake pedal vibration on several occasions

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

    Read the sentences of the record
    Fault
    ON SEVERAL OCCASIONS WHEN APPLYING BRAKES TO STOP THE YUKON IT FAILS TO STOP AND THEN ABS KICKS IN CAUSING BRAKE PEDAL TO VIBRATE AND LOSS OF PRESSURE IN BRAKE PEDAL THEN TRUCK DOES NOT STOP IT SLIDES.
    Remedy
    I HAVE REPLACED MASTER CYLINDER DID NOT HELP, TRUCK NEEDS ALL NEW BRAKE LINES DUE TO RUST.

  2. Owner complaint2003 GMC YUKON DENALI ・ 2012-03-28

    Brake failure while driving; brake pedal depressed to floorboard at 78,000 miles

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

    Read the sentences of the record
    Fault
    THE CONTACT STATED THAT WHILE DRIVING 20 MPH (= 32.2 km/h), THE BRAKES WERE APPLIED AND FAILED AND THE BRAKE PEDAL WAS DEPRESSED INTO THE FLOORBOARD.
    Remedy
    THE MECHANIC REPAIRED THE ENTIRE BRAKE LINE AND MASTER CYLINDER.
    Inspection
    THE MECHANIC DISCOVERED THAT THE BRAKE LINE WAS RUSTED AND LEAKING BRAKE FLUID.

Known issuesUnwanted ABS activation at low speed (front wheel speed sensor mounting corrosion)1

  1. Owner complaint2000 GMC YUKON ・ 2006-03-15

    ABS recall did not correct brake stopping difficulty; problem recurring

    1. 1Fault

      THE VEHICLE HAD DIFFICULTIES STOPPING AT LOW SPEEDS.

    2. 2Finding the cause

      Not stated

    3. 3Correction

    Read the sentences of the record
    Fault
    THE VEHICLE HAD DIFFICULTIES STOPPING AT LOW SPEEDS.
    Remedy
    THE FIRST TIME THE MASTER CYLINDER WAS REPLACED. (2 more)

EQUIPMENT1

  1. Owner complaint2003 GMC YUKON ・ 2006-08-17

    Spongy brakes with long pedal travel and extended stopping distance

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

    Read the sentences of the record
    Fault
    WHEN USED BRAKES WERE VERY SPONGY, LONG PEDAL TRAVEL BEFORE REACTION THEN EXTENDED STOPPING DISTANCE.
    Cause
    I BELIEVE THEY HAVE A PROBLEM WITH THE SYSTEM LIKE THEY HAD ON PREVIOUS S10 MODELS IN LATE 90'S WITH THE SLOW SPEED BRAKING RECALL. (1 more)

SERVICE BRAKES, HYDRAULIC1

  1. Owner complaint2003 GMC YUKON ・ 2006-08-22

    Spongy brake pedal and extended stopping distance after brake service

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

    Read the sentences of the record
    Fault
    WHEN BRAKES WERE APPLIED THE PEDAL WENT TO THE FLOOR AND LONGER THAN NORMAL DISTANCE WAS REQUIRED TO STOP. (1 more)
    Inspection
    FLUID LEVEL CHECKED FOUND TO BE WITHIN NORMAL RANGE, NORMAL COLOR AND NO APPARENT LEAKS.
    Consequence
    NO CRASH.