Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
1 conditions added

Common on this vehicle:Noise

issueSteering intermediate shaft clunkRemove

Record by record

3 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Read the records one by one (3)

Known issuesSteering intermediate shaft clunk3

  1. Manufacturer communication2000–2006 GMC YUKON ・ 2008-07-14

    Upper Intermediate Steering Shaft Clunking Noise

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

    Read the sentences of the record
    Remedy
    CLUNKING NOISE UNDER HOOD AND CAN BE FELT IN STEERING WHEEL AND/OR STEERING COLUMN (REPLACE UPPER INTERMEDIATE STEERING SHAFT [I-SHAFT] ASSEMBLY). *PE

  2. Manufacturer communication2005–2006 GMC YUKON ・ 2006-03-16

    Intermediate steering shaft clunk noise or stick-slip communication

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      EI05061 - INTERMEDIATE STEERING SHAFT CLUNK NOISE OR STICK-SLIP (FOLLOW STRATEGY BASED DIAGNOSTICS). 05-02-35-003 AND 05-02-35-003A NOT YET RECEIVED. *TT

      What the documents say to do

      Steering intermediate shaft clunk

      Confirm

      • When properly lubricated, there should be 13 mm (1/2 inch) of grease showing on the shaft splines.

      Repair

      1. Replace the upper intermediate steering shaft assembly.
      2. There are significant differences between the car and truck procedures: the lubricant is applied to a different part of the steering system and uses a different lubrication kit, 26098419.
    Read the sentences of the record
    Remedy
    EI05061 - INTERMEDIATE STEERING SHAFT CLUNK NOISE OR STICK-SLIP (FOLLOW STRATEGY BASED DIAGNOSTICS). 05-02-35-003 AND 05-02-35-003A NOT YET RECEIVED. *TT

  3. Manufacturer communication2004–2006 GMC YUKON ・ 2005-02-11

    Clunking Noise Under Hood and Steering Wheel Vibration

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      CLUNKING NOISE UNDER HOOD AND CAN BE FELT IN STEERING WHEEL. *EH UPDATED *EH UPDATED. *KB

      What the documents say to do

      Steering intermediate shaft clunk

      Confirm

      • When properly lubricated, there should be 13 mm (1/2 inch) of grease showing on the shaft splines.

      Repair

      1. Replace the upper intermediate steering shaft assembly.
      2. There are significant differences between the car and truck procedures: the lubricant is applied to a different part of the steering system and uses a different lubrication kit, 26098419.
    Read the sentences of the record
    Remedy
    CLUNKING NOISE UNDER HOOD AND CAN BE FELT IN STEERING WHEEL. *EH UPDATED *EH UPDATED. *KB