Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
1 conditions added

Common on this vehicle:NoiseVibration or shudder

issueSteering intermediate shaft clunkRemove

Record by record

5 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Work done

How it is said to have ended

  • says it did not fix it1

A ribbon is as wide as the records that state both of its ends (only the commonest are drawn). A record that names several symptoms or components runs through each. Orange is records that say the fault came back or was not fixed. Results come from owners’ reports only; one that does not say is “result not stated”. None of this is a likelihood of a cause or a rate at which work succeeds.

Read the records one by one (3)

Known issuesSteering intermediate shaft clunk3

  1. Manufacturer communication2000–2006 GMC YUKON ・ 2008-07-14

    Upper Intermediate Steering Shaft Clunking Noise

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

    Read the sentences of the record
    Remedy
    CLUNKING NOISE UNDER HOOD AND CAN BE FELT IN STEERING WHEEL AND/OR STEERING COLUMN (REPLACE UPPER INTERMEDIATE STEERING SHAFT [I-SHAFT] ASSEMBLY). *PE

  2. Manufacturer communication2000–2003 GMC FULLSIZE PICKUPS AND UTILITIES (YUKON) ・ 2003-09-01(also printed in 2 other issues)

    Noise on steering: lubricate the intermediate shaft instead of replacing it

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      Repair

      • The "Do This" column says to lube the I-Shaft.

      Caution

      • The "Don't Do This" column lists replacing the I-Shaft; the references are 00-02-35-003B and 02-02-35-006A.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：Row for 1999-2003 Fullsize Pickups and Utilities, Midsize Utilities: noise on steering.
    • Repair：The "Do This" column says to lube the I-Shaft.
    • Caution：The "Don't Do This" column lists replacing the I-Shaft; the references are 00-02-35-003B and 02-02-35-006A.

    Open this issue of GM TechLink ↗ The points above are read from an article of TechLink, GM’s monthly publication for dealership technicians. The article itself is not reproduced here.

    Remedy
    Truck Issues – Fix It Right The First Time 1999-2003 Fullsize Pickups and Utilities, Midsize Utilities – Noise on Steering Fullsize Pickups and Utilities, Midsize Utilities – Noise on Steering Lube I-Shaft Replace I-Shaft 00-02-35-003B 02-02-35-006A

  3. Owner complaint2000 GMC YUKON ・ 2003-11-20

    Rattle noise and vibration during sharp turns

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

    Read the sentences of the record
    Fault
    WHILE MAKING A SHARP TURN, THE DRIVER HEARD A RATTLE NOISE AND VIBRATION. (1 more)

Showing 3 of the 5 you can open. Narrow the search to see the rest.