GMC Yukon 2000–2006
Common on this vehicle:Noise
Record by record
1 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.
Read the records one by one (1)
Known issuesSnap or popping noise from the front of the vehicle (slot the front crossmember mounting holes)1
Manufacturer communication2003–2005 GMC YUKON ・ 2004-12-01
Snap or popping noise from the front of the vehicle: slot the crossmember mounting holes
1Fault
2Finding the cause
Not stated
3Correction
Repair
- Slot the left side mounting holes on the front crossmember.
Caution
- Do not replace the crossmember. The reference bulletin is 03-08-61-002D.
Read the sentences of the record
From the manufacturer’s document
- Applies to：2003-2005 Tahoe, Suburban, Avalanche, Silverado, Yukon/XL, Sierra, Escalade: a snap or popping noise from the front of the vehicle.
- Repair：Slot the left side mounting holes on the front crossmember.
- Caution：Do not replace the crossmember. The reference bulletin is 03-08-61-002D.
Open this issue of GM TechLink ↗ The points above are read from an article of TechLink, GM’s monthly publication for dealership technicians. The article itself is not reproduced here.
- Remedy
- Truck Issues – Fix It Right The First Time (new issues in bold) 2003-2005 Tahoe, Suburban, Avalanche, Silverado, Yukon/XL, Sierra, Escalade – Snap/Popping Noise from Front of Vehicle Slot left side mounting holes on front crossmember. Don’t replace crossmember. 03-08-61-002D