Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
2 conditions added

The vehicle (where a record says)

A record is under an engine, a drive or a series only where it says so: the characters of the vehicle identification number filed with a complaint, its text, or what its document says it applies to. A record that does not say is kept as "not stated". The filed numbers and the documents do not tell 4WD from AWD.

Common on this vehicle:Gauge or instrument faultLeakStalls or shuts offWarning lightCorrosion or rustMisfire or rough idleDoes not startSmoke or fire

Record by record

7 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Symptom

Component named as the cause

Work done

How it is said to have ended

  • says it came back1

A ribbon is as wide as the records that state both of its ends (only the commonest are drawn). A record that names several symptoms or components runs through each. Orange is records that say the fault came back or was not fixed. Results come from owners’ reports only; one that does not say is “result not stated”. None of this is a likelihood of a cause or a rate at which work succeeds.

Read the records one by one (4)

FUEL SYSTEM, GASOLINE2

  1. Manufacturer communication2000 GMC YUKON ・ 2001-05-10

    Fuel Pump Assembly Bushings Service Communication

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

      SOME VEHICLES MAY EXHIBIT BROKEN BUSHINGS IN THE FUEL PUMP ASSEMBLY RESULTING IN A NO START CONDITION, BLOWN FUSE AND INOPERATIVE FUEL PUMP. *TT

    Read the sentences of the record
    Remedy
    SOME VEHICLES MAY EXHIBIT BROKEN BUSHINGS IN THE FUEL PUMP ASSEMBLY RESULTING IN A NO START CONDITION, BLOWN FUSE AND INOPERATIVE FUEL PUMP. *TT

  2. Manufacturer communication2000 GMC YUKON ・ 2001-05-10

    Fuel Pump Assembly Bushing Issue and No Start Condition

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

      SOME VEHICLES MAY EXHIBIT BROKEN BUSHINGS IN THE FUEL PUMP ASSEMBLY RESULTING IN A NO START CONDITION WHERE THE FUSE HAS BLOWN AND THE FUEL PUMP WILL NOT WORK. *TT

    Read the sentences of the record
    Remedy
    SOME VEHICLES MAY EXHIBIT BROKEN BUSHINGS IN THE FUEL PUMP ASSEMBLY RESULTING IN A NO START CONDITION WHERE THE FUSE HAS BLOWN AND THE FUEL PUMP WILL NOT WORK. *TT

ENGINE1

  1. Manufacturer communication2000–2006 GMC YUKON DENALI ・ 2024-07-16(3 earlier editions of this document folded here)

    Fuel Injection Cleaner Kit Service Bulletin

    1. 1Fault

      • Rough idle, crank no start, extended crank or misfire, with the engine warning lamp on and DTC P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307 or P0308 set.
      • When the engine is cold, compression on multiple cylinders may be zero.
      • The engine may pop through the intake or exhaust while cranking, and the spark plugs may be fuel fouled.

    2. 2Finding the cause

      Possible causes

      • Major carbon build-up on the intake and/or exhaust valves from fuel contamination or incomplete burning of the fuel; misfires should not appear before at least 8,000 km (5,000 mi).

    3. 3Correction

      Repair

      1. If there is no valve damage and no cam follower out of place, perform the cleaning procedure to free sticking valves and remove carbon from the valves and pistons.
      2. If valves are damaged or cam followers are out of place, make the engine mechanical repairs first and then perform the cleaning procedure to prevent a return.
      3. Fill Cleaner Kit J-35800-A with about 650 ml (22 oz, 2 cans) of Air Intake, Combustion Chamber Cleaner and set the air pressure at the tool to 260 kPa (40 psi).
      4. With GDS 2 or a scan tool, command engine idle to 2000 rpm so the engine does not stall.
      5. With the engine at operating temperature in a well-ventilated area, slowly and carefully induce the cleaner into the engine, taking about 3 minutes.

      Parts

      • The Top Engine Cleaning Kit (ACDelco Air Intake, Valve and Combustion Chamber Cleaner and ACDelco Fuel System Cleaner 44K) is 19435372 for the U.S. and Canada.

      Part numbers printed in the document

      The numbers are as the document prints them. The name and the replacing number are what the pages of GMPartsGiant, a reseller of genuine parts and not GM, state. Aftermarket equivalents are not checked here (the links only search by number). Confirm the fit for the vehicle (VIN) before ordering.

      Caution

      • Inducing too much cleaner at too low an RPM, or stalling the engine with too much cleaner at once, may hydro-lock the engine and bend a connecting rod.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：Applies to GM passenger cars and trucks with gasoline engines only, model years 2000 to 2025.
    • Condition：Rough idle, crank no start, extended crank or misfire, with the engine warning lamp on and DTC P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307 or P0308 set.
    • Condition：When the engine is cold, compression on multiple cylinders may be zero.
    • Condition：The engine may pop through the intake or exhaust while cranking, and the spark plugs may be fuel fouled.
    • Cause：Major carbon build-up on the intake and/or exhaust valves from fuel contamination or incomplete burning of the fuel; misfires should not appear before at least 8,000 km (5,000 mi).
    • Repair：If there is no valve damage and no cam follower out of place, perform the cleaning procedure to free sticking valves and remove carbon from the valves and pistons.
    • Repair：If valves are damaged or cam followers are out of place, make the engine mechanical repairs first and then perform the cleaning procedure to prevent a return.
    • Caution：Inducing too much cleaner at too low an RPM, or stalling the engine with too much cleaner at once, may hydro-lock the engine and bend a connecting rod.
    • Repair：Fill Cleaner Kit J-35800-A with about 650 ml (22 oz, 2 cans) of Air Intake, Combustion Chamber Cleaner and set the air pressure at the tool to 260 kPa (40 psi).
    • Repair：With GDS 2 or a scan tool, command engine idle to 2000 rpm so the engine does not stall.
    • Repair：With the engine at operating temperature in a well-ventilated area, slowly and carefully induce the cleaner into the engine, taking about 3 minutes.
    • Parts：The Top Engine Cleaning Kit (ACDelco Air Intake, Valve and Combustion Chamber Cleaner and ACDelco Fuel System Cleaner 44K) is 19435372 for the U.S. and Canada.

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.

FUEL SYSTEM, OTHER1

  1. Owner complaint2004 GMC YUKON ・ 2005-06-26

    Fuel pump failure; vehicle would not start

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

    Read the sentences of the record
    Fault
    I WENT TO GET IN THE CAR THAT MORNING TO START IT UP AND IT WOULD NOT START. (1 more)
    Cause
    I WAS TOLD THAT THE FUEL PUMPS ON THESE VEHICLES WERE FAULTY.
    Remedy
    THEY REPLACED MY FUEL PUMP.
    Inspection
    MECHANIC STATED THAT MY FUEL PUMP HAD WENT OUT.
    Consequence
    BOTH TIMES THIS HAPPENED I WAS STRANDED WITH MY 3 YOUNG CHILDREN.

Showing 4 of the 7 you can open. Narrow the search to see the rest.