Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
1 conditions added

Common on this vehicle:Corrosion or rustVibration or shudder

causeWheelRemove

Record by record

2 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Symptom

Component named as the cause

A ribbon is as wide as the records that state both of its ends (only the commonest are drawn). A record that names several symptoms or components runs through each. Orange is records that say the fault came back or was not fixed. Results come from owners’ reports only; one that does not say is “result not stated”. None of this is a likelihood of a cause or a rate at which work succeeds.

Read the records one by one (2)

WHEELS2

  1. Manufacturer communication2001–2006 GMC YUKON DENALI ・ 2018-04-23

    Chromed Aluminum Wheels Chemical Staining and Corrosion

    1. 1Fault

    2. 2Finding the cause

      Possible causes

      • Chemical staining mostly results from acid based cleaners; the stains are frequently milky, black or greenish.
      • A second type of staining comes from road chemicals such as calcium chloride used for dust control on unpaved roads, and looks like small pitting.
      • A third type results from prolonged exposure to brake dust that penetrates the chrome.
      • If the brake material sits on the wheel while exposed to moisture or salt, it corrodes the wheel beneath the chrome and leaves a pit or small blister.

    3. 3Correction

      Repair

      1. Remove heavy brake dust build-up with GM Chrome Cleaner and Polish, P/N 1050173 (in Canada 10953013).
      2. For milky stains from acidic cleaners, after washing and drying apply 3M Chrome and Metal Polish #39527 with a clean terry cloth towel; the staining diminishes as it is applied.

      Caution

      • Do not use cleaning solutions containing hydrofluoric, oxalic and most other acids on chrome wheels or any wheels.
      • Any wheel cleaner must be thoroughly rinsed off the wheel with clean, clear water.
      • Stained wheels are not warrantable; most acid based cleaners permanently stain chrome wheels.
      • This polish reduces the thickness of the chrome plating and, if used incorrectly or excessively, may remove it altogether, exposing a less bright, brassy coloured sub-layer.
      • For spotting from road chemicals the procedure may marginally improve the condition but will not restore the finish or remove the pitting.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：Applies to 2013 and prior GM passenger cars and trucks.
    • Cause：Chemical staining mostly results from acid based cleaners; the stains are frequently milky, black or greenish.
    • Caution：Do not use cleaning solutions containing hydrofluoric, oxalic and most other acids on chrome wheels or any wheels.
    • Caution：Any wheel cleaner must be thoroughly rinsed off the wheel with clean, clear water.
    • Caution：Stained wheels are not warrantable; most acid based cleaners permanently stain chrome wheels.
    • Cause：A second type of staining comes from road chemicals such as calcium chloride used for dust control on unpaved roads, and looks like small pitting.
    • Cause：A third type results from prolonged exposure to brake dust that penetrates the chrome.
    • Cause：If the brake material sits on the wheel while exposed to moisture or salt, it corrodes the wheel beneath the chrome and leaves a pit or small blister.
    • Repair：Remove heavy brake dust build-up with GM Chrome Cleaner and Polish, P/N 1050173 (in Canada 10953013).
    • Repair：For milky stains from acidic cleaners, after washing and drying apply 3M Chrome and Metal Polish #39527 with a clean terry cloth towel; the staining diminishes as it is applied.
    • Caution：This polish reduces the thickness of the chrome plating and, if used incorrectly or excessively, may remove it altogether, exposing a less bright, brassy coloured sub-layer.
    • Caution：For spotting from road chemicals the procedure may marginally improve the condition but will not restore the finish or remove the pitting.

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This informational bulletin provides information on the appearance of chromed aluminum wheels due to chemical staining, pitting corrosion and/or spotted.

  2. Manufacturer communication2002–2003 GMC YUKON ・ 2003-07-24

    Tire Air Pressure Loss and Wheel Vibration on Six Bolt Steel Wheels

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

      TIRE AIR PRESSURE LOSE AND/OR EXCESSIVE WHEEL VIBRATION CONDITION ON MODELS WITH SIX BOLT 16X6-1/2 FULL-FACE STEEL WHEELS. *TT *JB

    Read the sentences of the record
    Remedy
    TIRE AIR PRESSURE LOSE AND/OR EXCESSIVE WHEEL VIBRATION CONDITION ON MODELS WITH SIX BOLT 16X6-1/2 FULL-FACE STEEL WHEELS. *TT *JB