GMC Yukon 2000–2006
Common on this vehicle:
Possible causes
The documents say what to doOnly records name itThe size of a node, the width of a link and the numbers are records matching this search, not likelihoods.
FaultCrate・GMC Yukon 2000–2006・2000
Candidate cause (the documents say what to do)
Roller Rocker: failed, broken
4 of the records matching this search name this component as the cause.
What to do
- If roller rocker arm needle bearings are found during an oil change, inspect all the roller rocker arms.
- Replace only the broken roller rocker arm; the remaining roller rocker arms need not be replaced.
- Needle bearings may also be in the cylinder head oil drains; clean the oil drains to retrieve them.
- There should be 66 bearings, 33 a side.
What is needed
- Parts and materials
- Roller rocker arm (if a damaged rocker arm is found; only the broken one)
- Labor time
- Not stated
- Special tools
- Not stated
- Scan tool
- Not stated
Only what the technical documents state. "Not stated" does not mean not needed.
In the records
- Roller Rocker: replaced 4
- Oil Drain: cleaned 3
See the evidence (1 technical documents, 4 records)
Manufacturer’s documents
- Needle Bearings in Roller Rockers During Oil Change PIP5226D 2020-08-10
Records
- Needle Bearings in Oil During Service Manufacturer communication 2017-03-21
A cause or a result a complaint states is the owner’s view or what a dealer told them, not an established fact.
Put together by FaultCrate from public records and technical documents. The cause and the repair are for the workshop to decide with the vehicle in front of it. Counts are records, not failure rates.