Skip to content
FaultCrate

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
1 conditions added

Common on this vehicle:Vibration or shudder

causePower Folding MirrorRemove

Record by record

2 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

A ribbon is as wide as the records that state both of its ends (only the commonest are drawn). A record that names several symptoms or components runs through each. Orange is records that say the fault came back or was not fixed. Results come from owners’ reports only; one that does not say is “result not stated”. None of this is a likelihood of a cause or a rate at which work succeeds.

Read the records one by one (1)

VISIBILITY1

  1. Manufacturer communication2005–2006 GMC YUKON DENALI ・ 2017-12-22(1 earlier editions of this document folded here)

    Power Folding Mirrors Reset Procedure

    1. 1Fault

      • The outside power foldaway mirror glass shakes or flutters while driving at normal speeds.
      • The mirror(s) may also not stay in the unfolded position.
    2. 2Finding the cause

      Possible causes

      • The mirror was folded and/or unfolded by hand, or was obstructed while power folding.
    3. 3Correction

      Repair

      • Fold and unfold the mirrors one time with the mirror controls to reset them to their normal position.

      Caution

      • A popping noise may be heard during the reset; it is normal after a manual folding operation.
      • For full size trucks, see the latest version of Corporate Bulletin Number 06-08-64-027 for vehicle-specific information.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to:2015 and prior GM passenger cars and light duty trucks equipped with power foldaway mirrors.
    • Condition:The outside power foldaway mirror glass shakes or flutters while driving at normal speeds.
    • Condition:The mirror(s) may also not stay in the unfolded position.
    • Cause:The mirror was folded and/or unfolded by hand, or was obstructed while power folding.
    • Repair:Fold and unfold the mirrors one time with the mirror controls to reset them to their normal position.
    • Caution:A popping noise may be heard during the reset; it is normal after a manual folding operation.
    • Caution:For full size trucks, see the latest version of Corporate Bulletin Number 06-08-64-027 for vehicle-specific information.

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This preliminary bulletin provides a procedure on how to reset the power folding mirriors after they been folded manually, to fix the customers concern of the mirriors shaking or fluttering at normal driving speeds.

Showing 1 of the 2 you can open. Narrow the search to see the rest.