GMC Yukon 2000–2006
Common on this vehicle:Misfire or rough idleDoes not startStalls or shuts off
Record by record
1 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.
Component named as the cause
A ribbon is as wide as the records that state both of its ends (only the commonest are drawn). A record that names several symptoms or components runs through each. Orange is records that say the fault came back or was not fixed. Results come from owners’ reports only; one that does not say is “result not stated”. None of this is a likelihood of a cause or a rate at which work succeeds.
Read the records one by one (1)
Known issuesIntermittent stall, misfire or crank no start (Ignition 1 feed wire broken near C148/C149)1
Manufacturer communication2005–2006 GMC YUKON ・ 2006-09-28
Loss of Ignition 1 Voltage to the Ignition Coils
1Fault
2Finding the cause
3Correction
What the documents say to do
Intermittent stall, misfire or crank no start (Ignition 1 feed wire broken near C148/C149)Confirm
- Complete the SI diagnostics first; if they are inconclusive and the concern can be duplicated, inspect for a loss of Ignition 1 voltage to the ignition coils.
Read the sentences of the record
- Remedy
- LOSS OF IGNITION 1 VOLTAGE TO THE IGNITION COILS. CONSUMER EXPERIENCED INTERMITTENT STALL, MISFIRE, OR CRANK NO START. THERE MAY BE NO TROUBLE CODES SET. *KB UPDATED 3/17/09. *PE