Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
1 conditions added

The vehicle (where a record says)

A record is under an engine, a drive or a series only where it says so: the characters of the vehicle identification number filed with a complaint, its text, or what its document says it applies to. A record that does not say is kept as "not stated". The filed numbers and the documents do not tell 4WD from AWD.

Common on this vehicle:NoiseCorrosion or rustAir conditioning or heaterLeak

causeHub AssemblyRemove

Possible causes

Suspension, wheels and tires7 records
Suspension, wheels and tires
1Grease seen at front hub bearing seals (normal purge, do not replace)

The documents say what to doOnly records name itThe size of a node, the width of a link and the numbers are records matching this search, not likelihoods.

FaultCrate・GMC Yukon 2000–2006・Suspension, wheels and tires

Candidate cause (the documents say what to do)

Grease seen at front hub bearing seals (normal purge, do not replace)

The factory grease fill of the front bearing/hub assembly exceeds what is required for bearing lubrication over the life of the vehicle.

Some grease purges through the self-venting seals in the initial drive period and helps form a barrier against contamination.

What to do

  1. Replace the bearing only for visible seal damage, endplay over 0.005 in (0.13 mm), rough rotation or abnormal noise.
  2. If desired, grease that has migrated away from the immediate seal area can be wiped off.

Caution: Do not replace the bearing for grease purge.

What is needed

Parts and materials
  • Bearing (only for visible seal damage, endplay over 0.005 in (0.13 mm), rough rotation or abnormal noise)
Labor time
Not stated
Special tools
Not stated
Scan tool
Not stated

Only what the technical documents state. "Not stated" does not mean not needed.

In the records

  • Bearing: replaced 1
See the evidence (2 technical documents, 1 records)

Passages of the technical documents

  • The bulletin covers 2004-2013 GMC Sierra, Sierra Classic, Yukon and Yukon Denali models.

    2004-2013 GMC Sierra, Sierra Classic, Yukon and Yukon Denali Models

    General Motors (published by NHTSA) 2012-10-29

  • The factory grease fill of the front bearing/hub assembly exceeds what is required for bearing lubrication over the life of the vehicle.

    The factory grease fill of the front bearing/hub assembly exceeds the amount of grease that is required for adequate bearing lubrication throughout the life of the vehicle.

    General Motors (published by NHTSA) 2012-10-29

  • Some grease purges through the self-venting seals in the initial drive period and helps form a barrier against contamination.

    A portion of the grease will purge through the self-venting bearing seals for the initial drive period (a few thousand miles/kilometers) and helps to form an additional barrier to block contamination of the bearing.

    General Motors (published by NHTSA) 2012-10-29

  • Do not replace the bearing for grease purge.

    Do not replace the bearing for grease purge.

    General Motors (published by NHTSA) 2012-10-29

Read every statement and its source →

Manufacturer’s documents

Records

None among the records that can be opened now.

See all 1 records of this cause →

A cause or a result a complaint states is the owner’s view or what a dealer told them, not an established fact.

Put together by FaultCrate from public records and technical documents. The cause and the repair are for the workshop to decide with the vehicle in front of it. Counts are records, not failure rates.