Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
1 conditions added

Common on this vehicle:

causeCompressor Inlet HoseRemove

Record by record

1 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Read the records one by one (1)

Known issuesAutoride (Z55) Service Ride Control / Service Suspension System message1

  1. Manufacturer communication2001–2006 GMC YUKON DENALI ・ 2013-08-06

    Service Suspension System Display - Trim Height/Compressor Issue

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

      GM: IF THE SERVICE SUSPENSION SYSTEM IS DISPLAYED ON THE DIC, THE TRIM HEIGHT MAY BE INCORRECT, LOOSE COMPRESSOR INLET HOSE, OR THE COMPRESSOR SELF TEST MAY BE INOPERATIVE. ALSO INCLUDED SUBURBAN LD MY 2001-2013, YUKON DENALI XL MY 2013, YUKON XL LD 2001-2013 *JS

      What the documents say to do

      Autoride (Z55) Service Ride Control / Service Suspension System message

      Confirm

      • The compressor assembly may need to be removed to see whether the wiring is pinched between the compressor and the frame.

      Repair

      1. Repair the damaged or shorted circuits and reposition the wiring so it is not damaged again when the compressor is installed.
      2. The sensor is not serviced separately; install a complete air filter, dryer and sensor assembly.

      Caution

      • Do not replace the complete air compressor assembly for this concern.
    Read the sentences of the record
    Remedy
    GM: IF THE SERVICE SUSPENSION SYSTEM IS DISPLAYED ON THE DIC, THE TRIM HEIGHT MAY BE INCORRECT, LOOSE COMPRESSOR INLET HOSE, OR THE COMPRESSOR SELF TEST MAY BE INOPERATIVE. ALSO INCLUDED SUBURBAN LD MY 2001-2013, YUKON DENALI XL MY 2013, YUKON XL LD 2001-2013 *JS