Instruments and lightingModel years 2002–2006Manufacturer
CHECK OIL LEVEL message stays on after an oil change or top-off until the engine cools
The article names 2002-06 Cadillac Escalade, Chevrolet Avalanche, Suburban, Tahoe, and GMC Yukon and Yukon Denali, and 1999-2007 Silverado Classic and Sierra Classic.
FaultCrate・CHECK OIL LEVEL message stays on after an oil change or top-off until the engine cools
The CHECK OIL LEVEL message may display after a repair if the key is left on during an oil change, or after topping off the engine oil due to a low oil condition.
On the Tech 2, the Engine Oil Level Switch data parameter shows OK, but the CHECK OIL LEVEL message is still displayed on the DIC.
This can result when the engine coolant temperature criteria to reset CHECK OIL LEVEL have not been met; the system must see a 50° F (10° C) drop in engine coolant temperature to recheck the oil level.
What to do
- On the next key cycle, if the engine oil level is OK, the DIC message will remain off.
- Run the engine until operating temperature is reached, then shut it off and let it cool down for 1 to 2 hours with the key in the off position.
Applies to
- The information applies to 1999-2007 Chevrolet Silverado Classic and GMC Sierra Classic, and 2002-06 Cadillac Escalade, Chevrolet Avalanche, Suburban, Tahoe, and GMC Yukon and Yukon Denali.
See the evidence (1 documents, 6 passages)
| Document | Publisher | Date |
|---|---|---|
| [1]GM TechLink, August 2006 ↗ | ManufacturerGeneral Motors | 2006-08-01 |
Applies toThe information applies to 1999-2007 Chevrolet Silverado Classic and GMC Sierra Classic, and 2002-06 Cadillac Escalade, Chevrolet Avalanche, Suburban, Tahoe, and GMC Yukon and Yukon Denali.
This information applies to 1999-2007 Chevrolet Silverado Classic and GMC Sierra Classic, 2002-06 Cadillac Escalade, Chevrolet Avalanche, Suburban, Tahoe, and GMC Yukon and Yukon Denali.— [1]
First signsThe CHECK OIL LEVEL message may display after a repair if the key is left on during an oil change, or after topping off the engine oil due to a low oil condition.
The CHECK OIL LEVEL message may display after a repair if the key is left on when doing an oil change, or after topping off the engine oil due to a low oil condition.— [1]
First signsOn the Tech 2, the Engine Oil Level Switch data parameter shows OK, but the CHECK OIL LEVEL message is still displayed on the DIC.
When using the Tech 2 to view the Engine Oil Level Switch data parameter, it will show OK, but the CHECK OIL LEVEL message will still be displayed on the DIC.— [1]
Why it happensThis can result when the engine coolant temperature criteria to reset CHECK OIL LEVEL have not been met; the system must see a 50° F (10° C) drop in engine coolant temperature to recheck the oil level.
These conditions could result if the engine coolant temperature criteria have not been met to reset the CHECK OIL LEVEL. The system must see a 50° F (10° C) drop in engine coolant temperature to recheck the engine oil level.— [1]
How to confirmOn the next key cycle, if the engine oil level is OK, the DIC message will remain off.
On the next key cycle, if the engine oil level is OK, the DIC message will remain off.— [1]
RepairRun the engine until operating temperature is reached, then shut it off and let it cool down for 1 to 2 hours with the key in the off position.
To correct this concern, allow the engine to run until operating temperature is reached. Then shut the engine off and allow the engine to cool down for 1 to 2 hours with the key in the off position.— [1]
Put together by FaultCrate from public records and technical documents. The cause and the repair are for the workshop to decide with the vehicle in front of it. Counts are records, not failure rates.
List the records (1 that can be opened)
Records whose recall number, document number or text matches. Each line says why it matched.
- CHECK OIL LEVEL message stays on after an oil change or top-off until the engine coolsManufacturer communication 2006-08-01・document number matches