Skip to content
FaultCrate
日本語Open preview: everything readable

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

Selected vehicle: 2006 · GMC Yukon XL Denali

Change vehicle →

← Back to cases

Source reference 10247061

Manufacturer communication — 2006 GMC YUKON DENALI XL

Fitment confirmedReporter type: ManufacturerELECTRICAL SYSTEMELECTRICAL SYSTEM:12V/24V/48V BATTERY

Relation to the target vehicle

  • The source's vehicle field includes the trim.
Model year
Match 2006 — Source vehicle field
Model
Match YUKON DENALI XL — Source vehicle field
Trim
Match Denali — Source vehicle field

What the manufacturer’s document says

PIT5074H ・ information ・ for GM vehicles in general

Applies to

  • Applies to 2005-2015 GM passenger cars and trucks.

    the passage
    2005-2015 GM Passenger Cars and Trucks

Finding the cause

Possible causes

  • In an intermittent electrical concern, terminal tension is one of the main culprits, especially with very small terminals.

    the passage
    When diagnosing an intermittent electrical concern, terminal tension is one of the main culprits, especially when working with very small terminals.

Steps to confirm (in the document’s order)

  • The J-35616-64B is the latest test probe for checking tension on, or probing, the .64 series terminals.

    the passage
    The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals.

Correction

Repair

  • The terminal can also be used to make jumper wires; use crimping tool J-38125-641 with jaw "H" for 22ga wire, "J" for 20 ga wire, or "K" for 18 ga.

    the passage
    Use crimping tool J-38125-641 and jaw "H" for 22ga wire, "J" for 20 ga wire, or "K" for 18 ga.

Parts

  • A terminated lead (the .64 test probe terminal already connected to a wire) is GM part number 13505346.

    the passage
    Another option is to order the .64 test probe terminal already connected to a lead/wire called a terminated lead. The GM part number is 13505346, which can be ordered through your normal GM CCA parts channel.

Part numbers printed in the document

The numbers are as the document prints them. The name and the replacing number are what the pages of GMPartsGiant, a reseller of genuine parts and not GM, state. Aftermarket equivalents are not checked here (the links only search by number). Confirm the fit for the vehicle (VIN) before ordering.

Caution

  • Always refer to the Connector End View in Service Information to determine the correct test probe.

    the passage
    Always refer to the Connector End View in Service Information for the latest information on determining the correct test probe to use.

  • If the terminal end of the J-35616-64B is bent, damaged, worn or broken, it should not be used.

    the passage
    If the terminal end of the J-35616-64B is bent, damaged, worn or broken it should not be used and a replacement test probe or terminal should be obtained from GM Tools at 1-800-468-6657.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

  1. Communication summary

    J-35616-64B 端子テストプローブ/交換用端子/端子付きリード Machine translation (unreviewed)

    J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead.
    Go to this passage in the original

Source

Source
NHTSA Manufacturer Communications
Source reference
10247061
Received by source
2023-12-11
Incident date
Unknown

Open original text and sourceOpen the provider's page (external)