Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

Selected vehicle: 2006 · GMC Yukon XL Denali

Change vehicle →

← Back to cases

Source reference 10137246

Manufacturer communication — 2006 GMC YUKON DENALI XL

Fitment confirmedReporter type: ManufacturerEQUIPMENT:ELECTRICAL

Relation to the target vehicle

  • The source's vehicle field includes the trim.
Model year
Match 2006 — Source vehicle field
Model
Match YUKON DENALI XL — Source vehicle field
Trim
Match Denali — Source vehicle field

What the manufacturer’s document says

15-08-44-001G ・ information ・ names this vehicle

Applies to

  • The model list addresses 2000-2014 GM passenger cars and light duty trucks.

    the passage
    2000-2014 GM Passenger Cars and Light Duty Trucks

  • It applies to vehicles equipped with OnStar (RPO UE1).

    the passage
    Equipped with OnStar® (RPO UE1)

Fault

  • To continue OnStar services without interruption, Canadian vehicles that do not have OnStar 3G/4G LTE need a hardware upgrade.

    the passage
    in order to continue to provide OnStar® services without interruption, Canadian vehicles that do not have OnStar® 3G/4G LTE will need a hardware upgrade.

Correction

Repair

  1. The technician installs the parts, programs the module using the Service Programming System (SPS) available on TIS2WEB, and confirms the connection.

    the passage
    Technician will install parts, program the module using Service Programming System (SPS) available on TIS2WEB and confirm connection.

  2. If installing module P/N 23230482, 23230536, 23230537, 23235220, 23235227, 23235234 or 23383877, transfer the Bluetooth antenna, if equipped, to the new module.

    the passage
    If installing the modules P/N 23230482, 23230536, 23230537, 23235220, 23235227, 23235234 and 23383877, transfer the Bluetooth Antenna (1), if equipped, to the new module.

  3. If the vehicle requires a UHF adaptor cable, install the UHF adapter cable (P/N 23242478) to the antenna connector of the module.

    the passage
    Install the UHF adapter cable (P/N 23242478) to the antenna connector (1) of the module.

  4. Install the female to male cable (P/N 23242476) to the module.

    the passage
    Install the female to male cable (P/N 23242476) to the module (2).

Part numbers printed in the document

The numbers are as the document prints them. The name and the replacing number are what the pages of GMPartsGiant, a reseller of genuine parts and not GM, state. Aftermarket equivalents are not checked here (the links only search by number). Confirm the fit for the vehicle (VIN) before ordering.

Parts

  • For 2003-2006 GMC Yukon models, the OnStar module chart lists 23230482, 23242476 and 23242478.

    the passage
    GMC Yukon Models 2003-2006 GMC Yukon Models 23230482 23242476 23242478

Part numbers printed in the document

The numbers are as the document prints them. The name and the replacing number are what the pages of GMPartsGiant, a reseller of genuine parts and not GM, state. Aftermarket equivalents are not checked here (the links only search by number). Confirm the fit for the vehicle (VIN) before ordering.

Caution

  • Hardware upgrade sets are VIN specific and must be installed on the vehicle the set was ordered for.

    the passage
    Hardware upgrade sets are VIN specific and must be installed on the vehicle that the set was ordered for.

  • Verify the battery voltage is more than 12 volts but less than 16 volts before proceeding with reprogramming.

    the passage
    Verify the battery voltage is more than 12 volts but less than 16 volts before proceeding with reprogramming.

  • Do not press the red OnStar Emergency Button at any time during the installation; this will cause module configuration issues.

    the passage
    Do NOT press the RED (OnStar® Emergency Button) at anytime during the installation. This will cause module configuration issues.

  • GDS 2 must be used to perform diagnostics specific to the upgraded OnStar system on these vehicles.

    the passage
    GDS 2 must be utilized to perform diagnostics specific to the upgraded OnStar® system on these vehicles.

What is needed

Parts and materials
  • OnStar module 23230482, female to male cable 23242476, UHF adaptor cable 23242478 (the GMC Yukon Models 2003-2006 row of the module chart)
Labor time
  • OnStar module replacement and cables installation: 1.0 hr (GMC Yukon Models 2003-2006)
Special tools
  • EL-49642 (SPS programming support tool)
Scan tool
  • Program the OnStar module (Telematics Communication Interface Control Module) with SPS, selecting "Reprogram ECU"
  • Mobile Telephone Antenna Setup with GDS2 (only vehicles with a glass mounted OnStar antenna)

Only what the technical documents state. "Not stated" does not mean not needed.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

  1. Communication summary

    本情報通知は、GM カナダの OnStar 携帯通信アップグレードに関する情報を提供するものです。 Machine translation (unreviewed)

    This informational bulletin provides information on a GM of Canada OnStar cellular communication upgrade.
    Go to this passage in the original

Source

Source
NHTSA Manufacturer Communications
Source reference
10137246
Received by source
2018-05-21
Incident date
Unknown

Open original text and sourceOpen the provider's page (external)