Skip to content
FaultCrate

This is an open preview: every record can be read without an account.

Selected vehicle: 2006 · GMC Yukon XL Denali

Change vehicle →

← Back to cases

Source reference 10125956

Manufacturer communication — 2006 GMC YUKON DENALI XL

Fitment confirmedReporter type: ManufacturerEQUIPMENTEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.

Relation to the target vehicle

  • The source's vehicle field includes the trim.
Model year
Match 2006 — Source vehicle field
Model
Match YUKON DENALI XL — Source vehicle field
Trim
Match Denali — Source vehicle field

What the manufacturer’s document says

PIC5088E ・ information ・ for GM vehicles in general

Applies to

  • 2002-2015 GM passenger cars and light-duty trucks with XM radio (RPO U2K or U2M).

    the passage
    2002-2015 GM Passenger Cars & Light-Duty Trucks With XM Radio (RPO U2K or U2M

Fault

  • Not all XM channels are received; usually only up to 10 channels come in (preview mode).

    the passage
    Some customers may report that they are not receiving all channels on the XM band. Usually they will only be receiving up to 10 channels (preview mode).

What is needed

Parts and materials
  • XM Digital Radio Receiver (DRR) (vehicles with XM radio; when the Digital Radio Receiver Status on the scan tool shows 03 or 04)
Labor time
Not stated
Special tools
Not stated
Scan tool
Not stated

Only what the technical documents state. "Not stated" does not mean not needed.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

  1. Communication summary

    本プレリミナリーインフォーメーション通知は、XMバンドのすべてのチャンネルを受信していない可能性がある車両について、整備士に情報を提供します。整備士はスキャンツールを使用し、データディスプレイ下の現在のDigital Radio Receiver Statusを確認する必要があります。整備士は「Digital Radio Receiver Status」とラベルされた二行目を確認してください。00~04の数字が表示されます。整備士はステータスコードに従って修理を実施してください。 Machine translation (unreviewed)

    This Preliminary Information communication provides information to the technician about vehicles that may not receiving all channels on the XM band. Technician will need to use a scan tool and verify current Digital Radio Receiver Status under Data Display. Technician will need to look at the second line labeled Digital Radio Receiver Status will display a number of 00 - 04. Technician will repair per the status code.
    Go to this passage in the original

Source

Source
NHTSA Manufacturer Communications
Source reference
10125956
Received by source
2017-12-22
Incident date
Unknown

Open original text and sourceOpen the provider's page (external)