Manufacturer communication — 2006 GMC YUKON DENALI XL

Fitment confirmedReporter type: ManufacturerELECTRICAL SYSTEM

Relation to the target vehicle

The source's vehicle field includes the trim.

Model year: Match 2006 — Source vehicle field
Model: Match YUKON DENALI XL — Source vehicle field
Trim: Match Denali — Source vehicle field

What the manufacturer’s document says

07-08-49-020L ・ information ・ names this vehicle

Applies to

Covers 2017 and prior GM passenger cars and trucks.
the passage
2017 and Prior GM Passenger Cars and Trucks

Fault

The bulletin is a reference guide for choosing the season odometer programming method after replacing the instrument panel cluster (IPC).
the passage
The purpose of this bulletin is to provide a reference guide to help identify which season odometer programming method to use after replacing the instrument panel cluster (IPC).

Correction

Repair

For the 2003-2006 Yukon the table gives IPC as the place the odometer value is stored and SPS as the programming method.
the passage
Yukon 2003-2006 IPC SPS
The SPS method is IPC reprogramming and setup using the service programming system (SPS).
the passage
IPC reprogramming and setup using the service programming system (SPS).

Caution

To keep system voltage stable during programming, install the EL-49642 SPS Programming Support Tool when required, or connect a fully charged 12 V jumper or booster pack disconnected from AC; do not connect a battery charger.
the passage
When required install the EL-49642 SPS Programming Support Tool to maintain system voltage. If not available, connect a fully charged 12 V jumper or booster pack disconnected from the AC voltage supply. DO NOT connect a battery charger.

What is needed

Parts and materials: Not stated
Labor time: Not stated
Special tools: EL-49642 SPS Programming Support Tool (to maintain system voltage during programming; when required; if not available, a fully charged 12 V jumper or booster pack disconnected from the AC voltage supply)
Scan tool: Odometer programming after replacing the IPC: SPS (Yukon 2003-2006; the value is stored in the IPC)

Only what the technical documents state. "Not stated" does not mean not needed.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

Communication summary
この技術情報は、IPCオドメータープログラミング方法クイックリファレンスガイドに関する情報を提供します。 Machine translation (unreviewed)
This informational bulletin provides information for the IPC odometer programming method quick reference guide.
Go to this passage in the original

Source

Source: NHTSA Manufacturer Communications
Source reference: 10116536
Received by source: 2017-08-31
Incident date: Unknown

Open original text and source Open the provider's page (external)