Source reference 10114775
Manufacturer communication — 2006 GMC YUKON DENALI XL
Relation to the target vehicle
- The source's vehicle field includes the trim.
- Model year
- Match 2006 — Source vehicle field
- Model
- Match YUKON DENALI XL — Source vehicle field
- Trim
- Match Denali — Source vehicle field
What the manufacturer’s document says
PIT5074H ・ information ・ for GM vehicles in general
Applies to
Applies to 2005-2015 GM passenger cars and trucks.
the passage
2005-2015 GM Passenger Cars and Trucks
Finding the cause
Possible causes
When diagnosing an intermittent electrical concern, terminal tension is one of the main culprits, especially with very small terminals.
the passage
When diagnosing an intermittent electrical concern, terminal tension is one of the main culprits, especially when working with very small terminals.
Steps to confirm (in the document’s order)
Use the J-35616-64B test probe to check tension on, or to probe, the .64 series terminals.
the passage
The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals.
Correction
Repair
When making jumper wires with this terminal, use crimping tool J-38125-641 with jaw "H" for 22 ga wire, "J" for 20 ga wire or "K" for 18 ga.
the passage
Use crimping tool J-38125-641 and jaw "H" for 22ga wire, "J" for 20 ga wire, or "K" for 18 ga.
Parts
The .64 terminated lead is GM part number 13505346, ordered from GM CCA parts.
the passage
64 Terminated Lead - GM part number 13505346 (ordered from GM CCA parts)
Part numbers printed in the document
13505346Splice Wire AssemblyLook up at RockAuto (aftermarket candidates) ↗Search the web ↗
No successor stated(replaces 13505345)as stated by GMPartsGiant (checked 2026-10-06) ↗
The numbers are as the document prints them. The name and the replacing number are what the pages of GMPartsGiant, a reseller of genuine parts and not GM, state. Aftermarket equivalents are not checked here (the links only search by number). Confirm the fit for the vehicle (VIN) before ordering.
Caution
Always refer to the Connector End View in Service Information to determine the correct test probe.
the passage
Always refer to the Connector End View in Service Information for the latest information on determining the correct test probe to use.
Do not use the J-35616-64B if its terminal end is bent, damaged, worn or broken; obtain a replacement probe or terminal.
the passage
If the terminal end of the J-35616-64B is bent, damaged, worn or broken it should not be used and a replacement test probe or terminal should be obtained from GM Tools at 1-800-468-6657.
Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.
Stated content
Communication summary
本予備情報通知は、J-35616-64B ターミナルテストプローブ、交換用ターミナル、およびターミネーティッドリードの使用に関する情報を技術者に提供します。J-35616-64B は.64シリーズターミナルのテンション確認またはプローブに対応した最新のテストプローブです。テストプローブターミナルはターミナル修理キット（J-38125-620H）内にリリースされており、Lear トレイ 7 部品番号 963716-2 に格納されています。パッケージ内に 5 本のターミネーティッドリードが含まれており、部品番号は 13505346 で、お客様の通常の General Motors カスタマーケア・アフターセールス部品チャネルから注文できます。 Machine translation (unreviewed)
This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
Go to this passage in the original
Source
- Source
- NHTSA Manufacturer Communications
- Source reference
- 10114775
- Received by source
- 2017-08-15
- Incident date
- Unknown
Open original text and sourceOpen the provider's page (external)