Source reference 10113256
Manufacturer communication — 2006 GMC YUKON DENALI XL
Relation to the target vehicle
- The source's vehicle field includes the trim.
- Model year
- Match 2006 — Source vehicle field
- Model
- Match YUKON DENALI XL — Source vehicle field
- Trim
- Match Denali — Source vehicle field
What the manufacturer’s document says
PIC5491C ・ information ・ for GM vehicles in general
Applies to
Applies to 2006-2014 GM passenger cars and trucks with OnStar (UE1) Gen7, Gen8, Gen9 or FCP1.
the passage
2006-2014 GM Passenger Cars and Trucks with OnStar (UE1) Gen7, Gen8, Gen9, or FCP1
Correction
Repair
With the issue present, turn off the ignition, cancel RAP, and perform a 5 minute power cycle of the VCIM.
the passage
With the issue present, turn off the ignition, cancel RAP, and perform a 5 minute power cycle of the VCIM.
What is needed
- Parts and materials
- VCIM (vehicles with a Gen7, Gen8, Gen9, FCP1 OnStar module; if the "No Power" concern is eliminated by a power cycle and then returns)(the document covers model year 2006 onward)
- Labor time
- Not stated
- Special tools
- Not stated
- Scan tool
- Not stated
Only what the technical documents state. "Not stated" does not mean not needed.
Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.
Stated content
Communication summary
本予備情報通知は、起動しないOnStarシステムを搭載した車両についての整備士向け情報を提供するものである。整備士はイグニッションを切り、保持されたアクセサリー電源をキャンセルする必要がある。車両の電源が切れた後、OnStarモジュールへの電力を五分間遮断する。電力が五分間遮断された後、OnStarシステムが作動している場合は車両を引き渡す。OnStarシステムがまだ作動していない場合は、公開されているサービス情報診断を続行する。整備士はSTID、ステーションID、またはOnStarカスタマー識別子に応じて、General Motors Technical Assistance Centerに連絡する必要がある場合がある。 Machine translation (unreviewed)
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics. Technician may need to contact General Motors Technical Assistance Center depending on the STID, Station ID, or OnStar Customer Identifier.
Go to this passage in the original
Source
- Source
- NHTSA Manufacturer Communications
- Source reference
- 10113256
- Received by source
- 2017-08-15
- Incident date
- Unknown
Open original text and sourceOpen the provider's page (external)