Source reference 2005-07-51

Manufacturer communication — 2005 GMC FULL SIZE UTILITIES (YUKON)

Reporter type: Manufacturer

Vehicles as recorded

2005 GMC FULL SIZE UTILITIES (YUKON XL) This vehicle's overview →
2005 GMC FULL SIZE UTILITIES (YUKON) This vehicle's overview →

What the manufacturer’s document says

fault and correction ・ names no model (for full-size utilities)

Applies to

Applies to 2005 Cadillac, Chevrolet and GMC Full Size Utilities with RPO JL4.
the passage
This information applies to 2005 Cadillac, Chevrolet, and GMC Full Size Utilities with RPO JL4.

Fault

Owners may comment on a Stability System Disabled or Service Stability message with DTC C0455.
the passage
Owners may comment on a Stability System Disabled or Service Stability message with DTC C0455.

Finding the cause

Possible causes

The concern may be caused by bent terminals on the SWPS (Steering Wheel Position Sensor).
the passage
This concern may be caused by bent terminals on the SWPS (Steering Wheel Position Sensor).

Steps to confirm (in the document’s order)

Remove the SWPS connector and inspect for bent terminals.
the passage
Remove the SWPS connector and inspect for bent terminals.

Correction

Repair

In most cases the terminals can be straightened without replacing the sensor.
the passage
In most cases, the terminals can be straightened without having to replace the sensor.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

Communication summary
スタビリティシステムこの情報は、RPO JL4 を装着した 2005 Cadillac、Chevrolet、GMC のフルサイズユーティリティに適用される。所有者が、DTC C0455 を伴う Stability System Disabled または Service Stability のメッセージを訴えることがある。この不具合は、SWPS（ステアリングホイールポジションセンサー）の端子の曲がりが原因である可能性がある。 SWPS のコネクターを外し、端子の曲がりがないか点検する。ほとんどの場合、センサーを交換しなくても端子をまっすぐに直すことができる。 Machine translation (unreviewed)
Stability System This information applies to 2005 Cadillac, Chevrolet, and GMC Full Size Utilities with RPO JL4. Owners may comment on a Stability System Disabled or Service Stability message with DTC C0455. This concern may be caused by bent terminals on the SWPS (Steering Wheel Position Sensor). Remove the SWPS connector and inspect for bent terminals. In most cases, the terminals can be straightened without having to replace the sensor.
Go to this passage in the original

Source

Source: GM TechLink
Source reference: 2005-07-51
Received by source: 2005-07-01
Incident date: Unknown

Open original text and source Open the provider's page (external)