本文へ移動
FaultCrate

公開準備中のため、いまは登録なしですべての記録を閲覧できます。プランの詳細は準備中です。

GMC Yukonユーコン2000–2006 年式

車種を変更 →

← 既知の不具合の一覧に戻る

電装・配線・電源2003–2005年式メーカー

ラジオの赤い盗難防止 LED が点滅しない(組立時のカウンターが 0 になっていない)

記事は車名ではなく「2003–05年式 Chevrolet, GMC, Cadillac and Hummer H2 full size trucks and utilities」と書いている。

2003年式から、盗難防止機能を有効にするために所有者がラジオにセキュリティコードを入力する必要は無くなった。機能は VIN の一部を学習して自動的に働く。

ラジオの組立中、製造者のカウンターが 255 カウントに設定され、組立の最後に 0 に戻されるはずである。カウンターが 0 に戻されていないと、ラジオの LED は点滅しない。

イグニッションスイッチを1回操作するごとにカウンターが 1 減る。0 になると赤い LED は正常に働き始める。

対処法

  1. 所有者が LED をすぐに働かせたい場合は、残りのカウントが 0 になるまで必要な回数だけイグニッションキーを操作する。
  2. 1回として数えられるには、キーを RUN と OFF の位置にそれぞれ 3 秒以上置く必要がある。

注意

  • イグニッションオフの間に Retained Accessory Power(RAP)がラジオを生かしたままにしないよう、キーのオン/オフ操作の間は運転席ドアを開けておく。
  • ラジオを SPS でプログラムしても、この症状は直らない。

対象

  • 2003 -05年式の Chevrolet、GMC、Cadillac、Hummer H2 の full size trucks and utilities が対象。ラジオの赤い盗難防止 LED が点滅しないとの指摘がある。
エビデンスを見る(出典 1件・引用 8か所)
文書発行元日付
[1]GM TechLink, April 2005 ↗
メーカーGeneral Motors
2005-04-01
  • 対象2003 -05年式の Chevrolet、GMC、Cadillac、Hummer H2 の full size trucks and utilities が対象。ラジオの赤い盗難防止 LED が点滅しないとの指摘がある。

    Owners of some 2003 -05 Chevrolet, GMC, Cadillac, and Hummer H2 full size trucks and utilities may comment that the red radio theft LED does not flash.— [1]
  • 原因・仕組み2003年式から、盗難防止機能を有効にするために所有者がラジオにセキュリティコードを入力する必要は無くなった。機能は VIN の一部を学習して自動的に働く。

    Starting with the 2003 model year, owners no longer have to enter a security code into the radio to activate the theft feature like earlier model years. The radio theft feature works automatically by learning a portion of the VIN.— [1]
  • 原因・仕組みラジオの組立中、製造者のカウンターが 255 カウントに設定され、組立の最後に 0 に戻されるはずである。カウンターが 0 に戻されていないと、ラジオの LED は点滅しない。

    During assembly of the radio, a manufacturer’s counter is set at 255 counts for assembly purposes and should be set to 0 counts at the end of assembly. If the counter is not set to 0, the radio LED will not flash.— [1]
  • 原因・仕組みイグニッションスイッチを1回操作するごとにカウンターが 1 減る。0 になると赤い LED は正常に働き始める。

    Each cycle of the ignition switch reduces the counter by 1 count. Once the counter reaches 0, the red LED starts to work normally.— [1]
  • 修理所有者が LED をすぐに働かせたい場合は、残りのカウントが 0 になるまで必要な回数だけイグニッションキーを操作する。

    If an owner requests the LED to operate immediately, the ignition key must be cycled as many times as required to run the remaining counts to 0.— [1]
  • 修理1回として数えられるには、キーを RUN と OFF の位置にそれぞれ 3 秒以上置く必要がある。

    To count as a cycle, the key must be left in the RUN and OFF positions for least 3 seconds each.— [1]
  • 注意イグニッションオフの間に Retained Accessory Power(RAP)がラジオを生かしたままにしないよう、キーのオン/オフ操作の間は運転席ドアを開けておく。

    TIP: To prevent the Retained Accessory Power (RAP) from keeping the radio alive when the ignition is off, be sure the driver’s door is open during the key on/key off process.— [1]
  • 注意ラジオを SPS でプログラムしても、この症状は直らない。

    TIP: SPS programming the radio will not correct the concern.— [1]

該当する記録 1件

メーカー通知 1

記録を見る(1件)
記録を一覧で見る(1件)

リコール番号・文書番号・本文の語句が一致した記録です。一致した理由を各行に示しています。