本文へ移動
FaultCrate

公開準備中のため、いまは登録なしですべての記録を閲覧できます。プランの詳細は準備中です。

GMC Yukonユーコン2000–2006 年式

車種を変更 →

← 既知の不具合の一覧に戻る

ブレーキ2000–2006年式メーカー

ABS 警告灯と通信異常(EBCM のアース G110 不良)

2000–2006年式の Yukon・Yukon Denali・Yukon XL ほか、フルサイズのトラック・SUV。

検査の結果、DTC C0265およびC0201がブレーキモジュールにセットされる可能性がある。

ブレーキモジュールとの通信が失われることもある。

対処法

  1. EBCMアースは運転席ドアの下のフレーム上にあり、複数のアースの中で12ゲージの太いワイヤーである。
  2. バッテリーケーブル・フレーム間アースも同様のABS症状を引き起こす可能性があり、同時に点検できる。
  3. Scotch-Briteローロックディスクまたは同等品などの工具を使用して、領域の前後をクリーニングする。
  4. 導電性仕上げのため、技術情報に指定されたボルト、ワッシャーおよびナットを使用する。
  5. 修復領域の前後をゴム質アンダーコーティングで覆う。

放置すると

  • DTC U1041は他のモジュールにもセットされることがある。→ 他のモジュール(DTC U1041)
  • EBCMアースの接続不良がブレーキモジュールの不要な交換を招いている。→ ブレーキモジュール(EBCM)の不要な交換

注意

  • この状態でブレーキモジュールを交換しない。さらなるEBCM診断の前にアースの修復を行う。

記録での結果

  • エレクトロニックブレーキコントロールモジュールグラウンド:調整 1件

対象

  • 技術情報は2000-2006 GMC Yukon、Yukon Denali、Yukon XLをリストアップしている。
  • フルサイズトラックおよびユーティリティではアース110が関連している。
エビデンスを見る(出典 1件・引用 12か所)
文書発行元日付
[1]#04-05-25-002E: ABS Light On, DTCs C0265, C0201, U1041 Set and/or Loss of Communication with Brake Module (Reground EBCM Ground) ↗
メーカーGeneral Motors (third-party hosted copy at simple-engineering.com)
2009-03-11
  • 対象技術情報は2000-2006 GMC Yukon、Yukon Denali、Yukon XLをリストアップしている。

    2000–2006 GMC Yukon, Yukon Denali, Yukon XL— [1] Models
  • 症状検査の結果、DTC C0265およびC0201がブレーキモジュールにセットされる可能性がある。

    Some customers may comment that the ABS light is on. Upon further inspection, DTCs C0265 and C0201 may be set in the brake module.— [1] Condition
  • 放置するとDTC U1041は他のモジュールにもセットされることがある。

    It is also possible for DTC U1041 to set in other modules.— [1] Condition
  • 症状ブレーキモジュールとの通信が失われることもある。

    There may also be a loss of communication with the brake module.— [1] Condition
  • 放置するとEBCMアースの接続不良がブレーキモジュールの不要な交換を招いている。

    A poor connection at the EBCM ground is causing unnecessary replacement of brake modules.— [1] Cause
  • 対象フルサイズトラックおよびユーティリティではアース110が関連している。

    Fullsize Trucks and Utilities = Ground 110— [1] Cause
  • 注意この状態でブレーキモジュールを交換しない。さらなるEBCM診断の前にアースの修復を行う。

    Important: Do not replace the brake module to correct this condition. Perform the following repair before further diagnosis of the EBCM.— [1] Correction
  • 点検方法EBCMアースは運転席ドアの下のフレーム上にあり、複数のアースの中で12ゲージの太いワイヤーである。

    The EBCM Ground is located on the frame beneath the driver's side door. If multiple grounds are found in this location, the EBCM ground can be identified as the heavy (12–gauge) wire.— [1] Correction step 1
  • 修理Scotch-Briteローロックディスクまたは同等品などの工具を使用して、領域の前後をクリーニングする。

    Clean the area, front and back, using a tool such as a *3M™ Scotch-Brite™ Roloc disc or equivalent.— [1] Correction step 3
  • 修理導電性仕上げのため、技術情報に指定されたボルト、ワッシャーおよびナットを使用する。

    It is important to use the bolts, washers and nuts specified in this bulletin. These parts have been identified due to their conductive finish.— [1] Correction step 4
  • 修理修復領域の前後をゴム質アンダーコーティングで覆う。

    Cover the front and back side of the repair area using Rubberized Undercoating.— [1] Correction step 6
  • 点検方法バッテリーケーブル・フレーム間アースも同様のABS症状を引き起こす可能性があり、同時に点検できる。

    An additional check can be made to ensure a good connection for the battery cable to frame ground. It is possible for this ground to cause similar symptoms with the ABS as described above.— [1] Correction

該当する記録 2件

メーカー通知 2

記録を見る(2件)
記録を一覧で見る(2件)

リコール番号・文書番号・本文の語句が一致した記録です。一致した理由を各行に示しています。