GMC Yukon XL 2000–2006
Common on this vehicle:Gauge or instrument faultWarning lightCorrosion or rustNoiseLeakReduced brakingStalls or shuts offLoss of engine power, no acceleration
Record by record
6 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.
Component named as the cause
How it is said to have ended
- says it was fixed1
A ribbon is as wide as the records that state both of its ends (only the commonest are drawn). A record that names several symptoms or components runs through each. Orange is records that say the fault came back or was not fixed. Results come from owners’ reports only; one that does not say is “result not stated”. None of this is a likelihood of a cause or a rate at which work succeeds.
Read the records one by one (6)
Known issuesHydro-boost brake assist and power steering share one hydraulic supply (four campaigns)3
Owner complaint2000 GMC YUKON XL ・ 2007-12-04
Power steering loss while driving in 2000 Yukon XL
1Fault
2Finding the cause
Not stated
3Correction
Not stated
What the documents say to do
Hydro-boost brake assist and power steering share one hydraulic supply (four campaigns)Confirm
- Perform the "Power Steering System Test" found in SI and make any necessary repairs based on system diagnosis.
Repair
- Dealers replace the hydro-boost relief valve.
- Dealers test the hydro-boost assembly for functional operation and replace it if it fails.
Caution
- An inoperative pump raises steering and braking effort but does not completely remove the ability to steer or slow the vehicle.
Read the sentences of the record
- Fault
- I WAS DRIVING MY YUKON XL 2000 WHEN ALL OF SUDDEN THE CAR LOST POWER STEERING.
- Inspection
- WHEN I TOOK THE CAR TO GM TO GET IT FIXED THEY INDICATED THAT FAILURE WAS EXACTLY WHAT WAS DESCRIBED IN THE REPORT 05V005000.
- Consequence
- I DID HURT MY NECK WHEN THIS PROBLEM OCCURRED TRYING TO CONTROL AND STEER THE CAR.
Owner complaint2001 GMC YUKON XL ・ 2004-02-10
Power steering pump failure with immediate loss of assist
1Fault
2Finding the cause
3Correction
Not stated
What the documents say to do
Hydro-boost brake assist and power steering share one hydraulic supply (four campaigns)Confirm
- Perform the "Power Steering System Test" found in SI and make any necessary repairs based on system diagnosis.
Repair
- Dealers replace the hydro-boost relief valve.
- Dealers test the hydro-boost assembly for functional operation and replace it if it fails.
Caution
- An inoperative pump raises steering and braking effort but does not completely remove the ability to steer or slow the vehicle.
Read the sentences of the record
- Fault
- POWER STEERING PUMP FAILURE 2001 YUKON XL. (3 more)
- Cause
- DEALER AND GM CONCLUDE THAT FAILURE WAS DUE TO COLD WEATHER .
- Inspection
- DEALER DETERMINED FAILURE TO BE A SHEARED SHAFT ON THE POWER STEERING PUMP, WHICH CAUSED IMMEDIATE LOSS OF POWER STEERING.
Owner complaint2004 GMC YUKON XL 1500 ・ 2010-02-16
Power steering pump internal shaft broke, causing loss of power steering and power brakes
1Fault
2Finding the cause
3Correction
Not stated
What the documents say to do
Hydro-boost brake assist and power steering share one hydraulic supply (four campaigns)Confirm
- Perform the "Power Steering System Test" found in SI and make any necessary repairs based on system diagnosis.
Repair
- Dealers replace the hydro-boost relief valve.
- Dealers test the hydro-boost assembly for functional operation and replace it if it fails.
Caution
- An inoperative pump raises steering and braking effort but does not completely remove the ability to steer or slow the vehicle.
Known issuesCrankshaft position sensor may work intermittently or fail (8.1L V8) - recall 07V-5212
Owner complaint2001 GMC YUKON XL 2500 ・ 2008-04-25
Engine stalled and lost power steering while driving 35 MPH at 82,000 miles
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Fault
- WHILE DRIVING 35 MPH (= 56.3 km/h), THE VEHICLE SUDDENLY STALLED AND LOST POWER STEERING.
- Remedy
- HE DROVE THE VEHICLE TO THE DEALER AND THEY REPLACED THE CRANKSHAFT POSITION SENSOR AND THERE HAD BEEN NO FURTHER OCCURRENCES.
Owner complaint2001 GMC YUKON XL 2500 ・ 2009-12-28
Stalling intermittently, determined to be crank positioning sensor
1Fault
2Finding the cause
3Correction
Not stated
What the documents say to do
Crankshaft position sensor may work intermittently or fail (8.1L V8) - recall 07V-521Repair
- Dealers replace the crankshaft position sensor.
- As the remedy, an improved CKP is installed.
Caution
- All of the surveyed consumers noted multiple stalling events before the CKP was properly diagnosed and replaced.
Read the sentences of the record
- Fault
- NOTICED FIRST OCCASION OF STALLING APP.
- Inspection
- DEALER SAID "COULDN'T REPRODUCE COMPLAINT" AND RELEASED THE VEHICLE. (1 more)
ELECTRICAL SYSTEM1
Owner complaint2004 GMC YUKON XL 1500 ・ 2019-03-12
Yukon displays reduced engine power and stalls without codes
1Fault
2Finding the cause
3Correction
Not stated
Read the sentences of the record
- Fault
- OUR YUKON ON NUMEROUS OCCASIONS WILL JUST DISPLAY REDUCED ENGINE POWER AND SPEED WILL DECREASE RAPIDLY. (2 more)
- Cause
- THAT WAS THE TEMPERATURE CONTROL MODULE FOR THOSE THAT MAY BE EXPERIENCING THIS ISSUE.
- Inspection
- THEY SAY THERE ARE NO CODES.
1 owner complaints have no classified sentences yet, so their causes and repairs are not picked out. Their text is in the list of records.