Skip to content
FaultCrate
日本語Open preview: everything readable

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

GMC Yukon XL 2000–2006

GMC Yukon XLModel years 2000–2006

Change vehicle →
Clear the search
2 conditions added

Common on this vehicle:Gauge or instrument faultWarning lightLeakNoiseCorrosion or rustVibration or shudderAir conditioning or heaterLoss of engine power, no acceleration

Possible causes

Warning light, 200480 records
Engine
Exhaust and emissions
Suspension, wheels and tires
Airbags and seat belts
Brakes
Transmission and driveline
9Intake manifold gasket leak (cold idle misfire, lean codes)5Single-cylinder misfire (P0300-P0308) and/or chirp, squeak or tick at camshaft speed: worn cam lobe / lifter, valve or valve spring1P0300 after engine repairs: injector connectors crossed (cylinders 5-7 / 6-8)1Accelerator Pedal4P0420 / P0430 on a new or just-replaced catalytic converter (break-in not completed)1Purge Solenoid2Autoride (Z55) Service Ride Control / Service Suspension System message1Aftermarket part (not the vehicle as built): Federal-Mogul National / Carquest replacement wheel hub assembly retention nut - recall 07E-1061SIR lamp on and inside mirror temperature/compass display inoperative (open air bag fuse, circuit 1139 shorted to ground)1Seat Belt Buckle1Seat Belt Warning Light0Air bag (SIR) lamp on with DTC B1001 after BCM or SDM replacement1ABS light with C0265/C0201/U1041 or no communication with brake module (EBCM ground G110)1Service Brake Booster message on a Hydroboost vehicle with DTC C0136 (instrument cluster not SPS programmed)0ABS lamp with DTC C0265 (EBCM motor relay circuit) after EBCM replacement0Brake pipe (brake line) corrosion and rupture14WD/AWD lamps and system inoperative: "sleepy" New Venture Gear transfer case control module (reprogram the TCCM)
5 causes not drawn

The documents say what to doOnly records name itThe size of a node, the width of a link and the numbers are records matching this search, not likelihoods.

FaultCrate・GMC Yukon XL 2000–2006・Warning light, 2004

Candidate cause (the documents say what to do)

Instrument panel cluster gauges stick, flutter or stop working

Customers reported that one or more instrument cluster gauges stick, flutter or become inoperative.

What to do

  1. Dealers replace the instrument panel cluster after verifying the condition.

In the records

No record states work done for this cause.

See the evidence (1 technical documents, 1 records)

Passages of the technical documents

  • 2003-2004 GMC SIERRA, YUKON, YUKON XL

    Anthony's Cluster Repair (repair-shop web page reproducing GM bulletin 07187C; not GM-hosted) 2009-03-20

  • 2005 GMC SIERRA, YUKON, YUKON XL (U.S. ONLY)

    Anthony's Cluster Repair (repair-shop web page reproducing GM bulletin 07187C; not GM-hosted) 2009-03-20

  • have reported that one or more of the instrument panel (IP) cluster gauges stick, flutter, or become inoperative.

    Anthony's Cluster Repair (repair-shop web page reproducing GM bulletin 07187C; not GM-hosted) 2009-03-20

  • This may cause inaccurate readings, including the speedometer and fuel gauge.

    Anthony's Cluster Repair (repair-shop web page reproducing GM bulletin 07187C; not GM-hosted) 2009-03-20

Read every statement and its source →

Records

None among the records that can be opened now.

See all 1 records of this cause →

A cause or a result a complaint states is the owner’s view or what a dealer told them, not an established fact.

Put together by FaultCrate from public records and technical documents. The cause and the repair are for the workshop to decide with the vehicle in front of it. Counts are records, not failure rates.