Skip to content
FaultCrate

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

GMC Yukon XL 2000–2006

GMC Yukon XLModel years 2000–2006

Change vehicle →
Clear the search
Add conditions (optional: symptom, model year, system, warning display, trouble code, kind of record)

Common on this vehicle:Noise

issueRattle from the center of the dash (cowl insulator clip)Remove

Record by record

1 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Read the records one by one (1)

Known issuesRattle from the center of the dash (cowl insulator clip)1

  1. Manufacturer communication2002 GMC C/K PICKUP AND UTILITY (YUKON XL) ・ 2002-06-01

    Rattle from the center of the dash: cowl insulator clip (bulletin 02-08-59-002)

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      Repair

      • The condition is a rattle type noise coming from the center of the dash; the correction is to remove the cowl insulator clip and insulate the mounting stud.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to:Bulletin 02-08-59-002 applies to 2002 Chevrolet and GMC C/K Pickup and Utility and the Cadillac Escalade with gas engine.
    • Repair:The condition is a rattle type noise coming from the center of the dash; the correction is to remove the cowl insulator clip and insulate the mounting stud.

    Open this issue of GM TechLink ↗ The points above are read from an article of TechLink, GM’s monthly publication for dealership technicians. The article itself is not reproduced here.

    Remedy
    Bulletins – May 2002 02-08-59-002; Rattle Type Noise Coming from Center of Dash (Remove Cowl Insulator Clip and Insulate Mounting Stud); 2002 Chevrolet and GMC C/K Pickup and Utility, Cadillac Escalade with Gas Engine Rattle Type Noise Coming from Center of Dash (Remove Cowl Insulator Clip and Insulate Mounting Stud)