Skip to content
FaultCrate
日本語Open preview: everything readable

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

GMC Yukon XL 2000–2006

GMC Yukon XLModel years 2000–2006

Change vehicle →
Clear the search
1 conditions added

Common on this vehicle:Warning light

P2227 is written only in documents for GM vehicles in general. No record or document that names this vehicle states it, and it may not be a code this model year and engine set. The records are shown as their sources write them.

Record by record

3 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Read the records one by one (1)

ENGINE AND ENGINE COOLING1

  1. Manufacturer communication2000–2006 GMC YUKON XL ・ 2020-02-10(2 earlier editions of this document folded here)

    Induction System Icing Inspection in Cold Temperatures

    1. 1Fault

      • On vehicles with turbocharged gasoline engines, poor engine performance or a check engine light in cold ambient temperatures may come with DTC P0299 or P2227.

    2. 2Finding the cause

      Not stated

    3. 3Correction

      This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance. Â

    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：Listed for all 2000 - 2020 models.
    • Condition：On vehicles with turbocharged gasoline engines, poor engine performance or a check engine light in cold ambient temperatures may come with DTC P0299 or P2227.

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance. Â

Showing 1 of the 3 you can open. Narrow the search to see the rest.