Skip to content
FaultCrate
日本語Open preview: everything readable

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

GMC Yukon XL 2000–2006

GMC Yukon XLModel years 2000–2006

Change vehicle →
Clear the search
Add conditions (optional: symptom, model year, system, warning display, trouble code, kind of record)

Common on this vehicle:

causeOnStar ModuleRemove

Record by record

1 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Component named as the cause

Work done

A ribbon is as wide as the records that state both of its ends (only the commonest are drawn). A record that names several symptoms or components runs through each. Orange is records that say the fault came back or was not fixed. Results come from owners’ reports only; one that does not say is “result not stated”. None of this is a likelihood of a cause or a rate at which work succeeds.

Read the records one by one (1)

ELECTRICAL SYSTEM1

  1. Manufacturer communication2006 GMC YUKON XL ・ 2017-08-15

    OnStar System Power-Up Issue - Preliminary Information

    1. 1Fault

      • The OnStar system will not power up, or no LED is lit and the OnStar button assembly does not respond.

    2. 2Finding the cause

    3. 3Correction

    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：Applies to 2006-2015 GM passenger cars and trucks with OnStar (UE1).
    • Condition：The OnStar system will not power up, or no LED is lit and the OnStar button assembly does not respond.

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics. Technician may need to contact General Motors Technical Assistance Center depending on the STID, Station ID, or OnStar Customer Identifier.