Source reference 10154552
Manufacturer communication — 2006 GMC YUKON DENALI XL
Relation to the target vehicle
- The source's vehicle field includes the trim.
- Model year
- Match 2006 — Source vehicle field
- Model
- Match YUKON DENALI XL — Source vehicle field
- Trim
- Match Denali — Source vehicle field
What the manufacturer’s document says
PIP4925B ・ fault and correction ・ for GM vehicles in general
Applies to
Applies to all 2000 - 2019 models with gasoline engines.
the passage
All All 2000 - 2019 All All All (Gasoline Engines Only) All
Fault
The SES light is on, and initial diagnosis may show fuel trim and/or O2 sensor related codes such as P0171, P0174, P0420 and P0430.
the passage
A customer may comment the vehicle has an SES light on. Initial diagnosis may display any of these fuel trim and/or O2 sensor related codes, P0101, P0137, P0138, P0140, P0141,P0157, P0158, P0160, P0161, P0171, P0174, P0420, P0430, P1174, P1175, P2096, P2097, P2098, P2099, P2177, P2178, P2179, P2180, P2187, P2188, P2189, P2190. P2270, P2271, P2272, P2273.
Finding the cause
Steps to confirm (in the document’s order)
If normal SI diagnostics do not resolve it and an intake vacuum leak or exhaust leak is suspected, the J41413-200 Evaporative System Tester smoke machine, the J-41416 ultrasonic leak tester, or soapy water with low pressure air into the tailpipe may help find the leak.
the passage
If normal SI diagnostics does not lead to a resolution and an intake vacuum leak or an exhaust leak is suspected, the use of the J41413-200 Evaporative System Tester smoke machine or the J-41416 ultrasonic leak tester, or possibly using soapy water and low pressure air into the tailpipe may be useful to find the leak.
For an intake leak, the smoke can be introduced into the brake booster hose or the oil dipstick tube.
the passage
For an intake leak the smoke can be introduce into the brake booster hose or the oil dipstick tube.
Soapy water can be sprayed near the gasket and seams and on all vacuum nipples.
the passage
Soapy water can be sprayed near the gasket and seams and all vacuum nipples.
For an exhaust leak, a hose into the tailpipe carrying smoke or air, sealed with shop towels, is effective.
the passage
For an exhaust leak the hose into the tailpipe, with smoke or air, sealed with shop towels proves to be effective.
Then spray soapy water around the seals, seams and bosses.
the passage
Then soapy water would be sprayed around seal, seems and bosses.
These methods are very good for finding small leaks around the O2 sensor bosses and slight cracks in an intake plenum or gasket.
the passage
These methods are very good for finding small leaks around the O2 sensor embossments and slight cracks in an intake plenum or gasket.
Correction
Caution
All of these tests are much more effective if the throttle body is covered/sealed.
the passage
NOTE: All of these tests are much more effective if the throttle body is covered/sealed.
Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.
Stated content
Communication summary
本予備情報文書は、ベーパー排出カートスモークマシンおよび超音波リーク検出器ツールを使用して、吸入または排気エアリークの可能性を診断する方法に関するアドバイスを通知するものです。 Machine translation (unreviewed)
This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detector tools.
Go to this passage in the original
Source
- Source
- NHTSA Manufacturer Communications
- Source reference
- 10154552
- Received by source
- 2019-03-18
- Incident date
- Unknown
Open original text and sourceOpen the provider's page (external)