Source reference 10111977
Manufacturer communication — 2006 GMC YUKON DENALI XL
Relation to the target vehicle
- The source's vehicle field includes the trim.
- Model year
- Match 2006 — Source vehicle field
- Model
- Match YUKON DENALI XL — Source vehicle field
- Trim
- Match Denali — Source vehicle field
What the manufacturer’s document says
PIP5169 ・ fault and correction ・ names this vehicle
Applies to
The model list includes the 1999-2013 GMC Savana, Sierra and Yukon.
the passage
1999-2013 GMC Savana, Sierra, Yukon
The listed models are covered when they have a V8 engine.
the passage
with a V8 engine
Fault
DTC P0300 sets after engine repairs.
the passage
DTC P0300 Setting After engine Repairs.
The engine misfire may not be detected and may happen during deceleration.
the passage
The engine misfire may not be detected and may happen during deceleration.
Finding the cause
Possible causes
The injector connectors for cylinders 5-7 and 6-8 can be crossed, which causes an engine misfire.
the passage
It is possible to have injector connectors crossed for cylinder 5-7 and 6-8 to cause an engine misfire.
Steps to confirm (in the document’s order)
If crossed injector connectors are a possible cause, use the applicable SI document to validate the injector connector routing.
the passage
If you have determined crossed injector connectors maybe a possible case, use the applicable SI document to validate the injector connector routing.
Correction
Repair
Correct the injector connector routing and evaluate for the concern.
the passage
Correct the injector connector routing and evaluate for the concern.
What is needed
- Parts and materials
- Not stated
- Labor time
- Not stated
- Special tools
- Not stated
- Scan tool
- Not stated
Only what the technical documents state. "Not stated" does not mean not needed.
Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.
Stated content
Communication summary
本暫定情報は、エンジン修理後に診断コードP0300が設定される車両について、整備士に情報を提供するものです。整備士は、シリンダー5-7および6-8のインジェクターコネクターが交差していないことを確認する必要があります。 Machine translation (unreviewed)
This Preliminary Information communication provides information to the technician about vehicles that are setting Diagnostic Trouble Code P0300 after engine repairs. Technician will need to ensure that injector connectors for cylinder 5-7 and 6-8 are not crossed.
Go to this passage in the original
Source
- Source
- NHTSA Manufacturer Communications
- Source reference
- 10111977
- Received by source
- 2017-08-15
- Incident date
- Unknown
Open original text and sourceOpen the provider's page (external)