本文へ移動
FaultCrate

公開準備中のため、いまは登録なしですべての記録を閲覧できます。プランの詳細は準備中です。

選択中の車種: 2006 · GMC Yukon XL Denali

車種を変更 →

← 症例へ戻る

GM TechLink 2006-08-01

原文と出典

原文

CHECK OIL LEVEL Message This information applies to 1999-2007 Chevrolet Silverado Classic and GMC Sierra Classic, 2002-06 Cadillac Escalade, Chevrolet Avalanche, Suburban, Tahoe, and GMC Yukon and Yukon Denali. The CHECK OIL LEVEL message may display after a repair if the key is left on when doing an oil change, or after topping off the engine oil due to a low oil condition. When using the Tech 2 to view the Engine Oil Level Switch data parameter, it will show OK, but the CHECK OIL LEVEL message will still be displayed on the DIC. These conditions could result if the engine coolant temperature criteria have not been met to reset the CHECK OIL LEVEL. The system must see a 50° F (10° C) drop in engine coolant temperature to recheck the engine oil level. To correct this concern, allow the engine to run until operating temperature is reached. Then shut the engine off and allow the engine to cool down for 1 to 2 hours with the key in the off position. On the next key cycle, if the engine oil level is OK, the DIC message will remain off.

提供元のページを開く(外部)

出典

情報源
GM TechLink — メーカーがディーラーへ出した通知(行政機関が要約を公開)
報告者の区分
メーカー
情報源での番号
2006-08-01
国・市場
US
言語
en
文書版
第2版(保持2版)
情報源についての注記
Copyright General Motors Corporation. No licence is stated. Held as the headline and short quoted passages with the issue named and linked; the articles themselves are not stored or shown.

日時

発生日
不明
情報源の受付日
2006-08-01
情報源のファイルへの追加日
情報源のAPIが返さないため不明
発行・公表日
2006-08-01
初回観測
2026-10-06 17:58 JST (初回の一括取得)
この版の取得
2026-10-08 23:58 JST
原文と出典 — GM TechLink 2006-08-01 | FaultCrate