GMC Yukon 2000–2006

• Crankshaft position sensor may work intermittently or fail (8.1L V8) - recall 07V-5218.1L only0
• Throttle body carbon build-up: idle surge, reduced engine power, throttle DTCs (high mileage)0
• Front right-hand brake pipe contact with body cross sill - recall 00V-3450
• Stability System Disabled message and unwanted StabiliTrak activation (tire wear or mismatched tires)0
• ABS lamp with DTC C0265 (EBCM motor relay circuit) after EBCM replacement0
• Autoride (Z55) Service Ride Control / Service Suspension System message2
• Aluminum Wheel Bead Seat: corroded2
• Aftermarket part (not the vehicle as built): Federal-Mogul National / Carquest replacement wheel hub assembly retention nut - recall 07E-1062WD only1
• Rear door window inoperative (motor replacement)1
• Power Window: failed1
• Sunroof: failed1
• Service 4WD indicator and DTC B2725 (transfer case shift control switch)4WD / AWD only1
• 4WD/AWD lamps and system inoperative: "sleepy" New Venture Gear transfer case control module (reprogram the TCCM)4WD / AWD only1
• Transfer case service light, New Venture Gear transfer case (replace the encoder motor sensor and reprogram the TCCM)0
• Transfer Case Speed Sensor Wiring Harness: electrical fault1
• Rear HVAC ticking noise, no rear temperature or mode control, DTC B0434 / B3764 (revised auxiliary HVAC control module)1
• Seat Heater: overheated1
• No response when the OnStar button is pressed (DTC B2476): button assembly test values1
• Red OnStar LED and DTC B2455 after Canada upgrade bulletin 15-08-44-001 (audio and microphone drain wires shorted)1
• Instrument panel cluster gauges stick, flutter or stop working1
• CHECK OIL LEVEL message stays on after an oil change or top-off until the engine cools0
• Quadrasteer: rear wheels stay turned after the front wheels are straight (controlled re-centering after a fault, normal operation)1

Causes the records name for which no check or repair is stated, in a technical document or in a record. Press one for the records that name it.

Electrical, wiring and power

ATC Fuse: electrical fault, failed (2)Bulb Socket: overheated (1)Powertrain Control Module: software (1)Intermittent no start with Service Stability, ABS light, 'Unknown Driver' and multiple DTCs / no module communication (0)

Brakes

Wheel Speed Sensor: failed (2)Service Stability message with DTC C0131, C0196, C0290 and/or C0292 (1)Anti-Lock Brake Motor: failed (1)Anti-Lock Brake Pump: failed (1)

Airbags and seat belts

Airbag: failed (1)Airbag Sensor: failed (1)

Instruments and lighting

Bulb: failed (1)Instrument Panel Cluster: failed (1)

Heating and air conditioning

Encoder Motor: electrical fault (1)

Exhaust and emissions

Evap Vent Valve: clogged or contaminated (1)Exhaust Manifold Bolt: broken (1)Secondary Air Injection Valve: corroded (1)

Fuel system

Fuel Tank: leaking (1)

Audio and telematics

OnStar System: failed (1)

Body, doors and interior

Seat Position Sensor: broken (1)

Suspension, wheels and tires

Shock: failed (1)

Transmission and driveline

Transmission: failed (1)Transmission Control Module: failed (1)Transmission Range Switch: failed (1)