GMC Yukon 2000–2006

▸Known issuesRemote keyless entry and front passenger door window, lock, mirror inoperative (reprogram the Passenger Door Module)5

1. Manufacturer communication2004 GMC FULL SIZE PICKUPS AND UTILITIES (YUKON) ・ 2005-12-01(also printed in 9 other issues)

   Passenger door module and RKE inoperative: re-flash the passenger door module

   1. 1Fault

      Not stated

      ↓→

   2. 2Finding the cause

      Not stated

      ↓→

   3. 3Correction

      Repair

      • Re-flash the passenger door module.

      Caution

      • Do not replace the passenger door module; the reference is bulletin 04-08-52-005.
   Read the sentences of the record

   From the manufacturer’s document

   • Applies to：Row for 2004 Full Size Pickups and Utilities, H2: passenger door module and RKE inoperative.
   • Repair：Re-flash the passenger door module.
   • Caution：Do not replace the passenger door module; the reference is bulletin 04-08-52-005.

   Open this issue of GM TechLink ↗ The points above are read from an article of TechLink, GM’s monthly publication for dealership technicians. The article itself is not reproduced here.

   Remedy

   Truck Issues — Fix It Right the First Time (new issues in bold) 2004 Full Size Pickups and Utilities, H2 – Passenger Door Module and RKE Inoperative Re-flash passenger door module. Don’t replace passenger door module. 04-08-52-005

2. Manufacturer communication2003–2004 GMC YUKON DENALI ・ 2004-08-25

   Passenger Door Module Inoperative (Full Size Truck/Utilities/Hummer H2)

   1. 1Fault

      Not stated

      ↓→

   2. 2Finding the cause

      • Passenger Door Module: failed
      ↓→

   3. 3Correction

      SERVICE VME - 03 - 04 FULL SIZE TRUCK, UTILITIES AND HUMMER H2 PASSENGER DOOR MODULE INOPERATIVE. *MJ

      What the documents say to do

      Remote keyless entry and front passenger door window, lock, mirror inoperative (reprogram the Passenger Door Module)

      Confirm

      • Vehicles built before 01/03: refer to Bulletin 03-08-52-001C.

      Repair

      1. Instead of replacing the Door Lock and Side Window Switch, the PDM can now be refreshed and reprogrammed with the Tech 2.
      2. Re-flash the passenger door module.

      Caution

      • The Tech 2 must contain software 23.001 (CD 3) or newer; if it does not, download this software before proceeding.
   Read the sentences of the record

   Remedy

   SERVICE VME - 03 - 04 FULL SIZE TRUCK, UTILITIES AND HUMMER H2 PASSENGER DOOR MODULE INOPERATIVE. *MJ

3. Manufacturer communication2004 GMC YUKON DENALI ・ 2004-05-25

   Passenger Door Module Lock Up

   1. 1Fault

      Not stated

      ↓→

   2. 2Finding the cause

      • Passenger Door Module: failed
      ↓→

   3. 3Correction

      PASSENGER DOOR MODULE LOCK UP.*MR

      What the documents say to do

      Remote keyless entry and front passenger door window, lock, mirror inoperative (reprogram the Passenger Door Module)

      Confirm

      • Vehicles built before 01/03: refer to Bulletin 03-08-52-001C.

      Repair

      1. Instead of replacing the Door Lock and Side Window Switch, the PDM can now be refreshed and reprogrammed with the Tech 2.
      2. Re-flash the passenger door module.

      Caution

      • The Tech 2 must contain software 23.001 (CD 3) or newer; if it does not, download this software before proceeding.
   Read the sentences of the record

   Remedy

   PASSENGER DOOR MODULE LOCK UP.*MR

4. Manufacturer communication2003 GMC YUKON ・ 2003-07-24

   Passenger Door Module Service Communication

   1. 1Fault

      • Seat or seat heater
      • Power window
      ↓→

   2. 2Finding the cause

      Not stated

      ↓→

   3. 3Correction

      PASSENGER DOOR MODULE RECALL FOR REMOTE KEYLESS ENTRY, FRONT PASSENGER POWER WINDOW, LOCK, MIRROR AND HEATED SEAT FUNCTIONS. *TT *JB

      What the documents say to do

      Remote keyless entry and front passenger door window, lock, mirror inoperative (reprogram the Passenger Door Module)

      Confirm

      • Vehicles built before 01/03: refer to Bulletin 03-08-52-001C.

      Repair

      1. Instead of replacing the Door Lock and Side Window Switch, the PDM can now be refreshed and reprogrammed with the Tech 2.
      2. Re-flash the passenger door module.

      Caution

      • The Tech 2 must contain software 23.001 (CD 3) or newer; if it does not, download this software before proceeding.
   Read the sentences of the record

   Remedy

   PASSENGER DOOR MODULE RECALL FOR REMOTE KEYLESS ENTRY, FRONT PASSENGER POWER WINDOW, LOCK, MIRROR AND HEATED SEAT FUNCTIONS. *TT *JB

5. Manufacturer communication2003 GMC FULL-SIZE PICKUPS AND UTILITIES (YUKON) ・ 2003-07-01

   RKE fob and front passenger door window, lock, mirror and heated seat inoperative: refresh and reprogram the Passenger Door Module

   1. 1Fault

      • Liftgate, rear glass or door lock
      • Seat or seat heater
      • Power window
      ↓→

   2. 2Finding the cause

      Possible causes

      • The Door Lock and Side Window Switch contains a microprocessor called the Passenger Door Module (PDM); the condition and the repair procedure involve the PDM.

      Steps to confirm (in the document’s order)

      1. Vehicles built before 01/03: refer to Bulletin 03-08-52-001C.
      2. Vehicles built during 01/03: refer to Customer Satisfaction Bulletin 03-011.
      3. Vehicles built 02/03 or later: refer to the published Service Information for the symptom the customer experiences.
      ↓→

   3. 3Correction

      Repair

      • Instead of replacing the Door Lock and Side Window Switch, the PDM can now be refreshed and reprogrammed with the Tech 2.

      Caution

      • The Tech 2 must contain software 23.001 (CD 3) or newer; if it does not, download this software before proceeding.
      • Once the correct bulletin is identified, its procedures must be performed in the order given, without skipping any steps.
   Read the sentences of the record

   From the manufacturer’s document

   • Applies to：Applies to 2003 Chevrolet and GMC full-size pickups and utilities, Cadillac Escalade models and Hummer H2: the RKE key fob does not function and the front passenger door power window, lock, mirror and heated seat are inoperative.
   • Cause：The Door Lock and Side Window Switch contains a microprocessor called the Passenger Door Module (PDM); the condition and the repair procedure involve the PDM.
   • Confirm：Vehicles built before 01/03: refer to Bulletin 03-08-52-001C.
   • Confirm：Vehicles built during 01/03: refer to Customer Satisfaction Bulletin 03-011.
   • Confirm：Vehicles built 02/03 or later: refer to the published Service Information for the symptom the customer experiences.
   • Repair：Instead of replacing the Door Lock and Side Window Switch, the PDM can now be refreshed and reprogrammed with the Tech 2.
   • Caution：The Tech 2 must contain software 23.001 (CD 3) or newer; if it does not, download this software before proceeding.
   • Caution：Once the correct bulletin is identified, its procedures must be performed in the order given, without skipping any steps.

   Open this issue of GM TechLink ↗ The points above are read from an article of TechLink, GM’s monthly publication for dealership technicians. The article itself is not reproduced here.

   Remedy

   Reprogramming Passenger Door Module Owners of some 2003 Chevrolet and GMC full-size pickups and utilities, Cadillac Escalade models and Hummer H2 may have concerns that the RKE key fob does not function, the front passenger door power window, lock, mirror and heated seat are inoperative. The Door Lock and Side Window Switch contains a microprocessor called the Passenger Door Module (PDM). The condition and repair procedure involve the PDM. - Those built before 01/03 -- refer to Bulletin 03-08-52-001C. - Those built during 01/03 -- refer to Customer Satisfaction Bulletin 03-011. - Those built 02/03 or later -- refer to published Service Information for the symptom experienced by the customer. Instead of replacing the Door Lock and Side Window Switch, you can now refresh and reprogram the PDM using your Tech 2. TIP: Your Tech 2 must contain software 23.001 (CD 3) or newer, released March 8. If it does not, you must download this software before proceeding. And once you have identified the correct bulletin, you MUST perform the procedures described in it, in the order given, and do not skip any steps.