Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
Add conditions (optional: symptom, model year, system, warning display, trouble code, kind of record)

Common on this vehicle:NoiseVibration or shudder

issueEngine vibration or noise at idle felt in the steering wheel or seat (reprogram the PCM)Remove

Record by record

1 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Read the records one by one (1)

Known issuesEngine vibration or noise at idle felt in the steering wheel or seat (reprogram the PCM)1

  1. Manufacturer communication2003–2005 GMC YUKON ・ 2005-11-01

    Engine vibration or noise at idle felt in the steering wheel or seat: reprogram the PCM

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      Repair

      • Reprogram the PCM.

      Caution

      • Do not align the exhaust and/or hang weights. The reference bulletin is 05-06-01-006.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：2003-2005 Tahoe, Yukon, Escalade: engine vibration or noise at idle, with vibration felt in the steering wheel or seat.
    • Repair：Reprogram the PCM.
    • Caution：Do not align the exhaust and/or hang weights. The reference bulletin is 05-06-01-006.

    Open this issue of GM TechLink ↗ The points above are read from an article of TechLink, GM’s monthly publication for dealership technicians. The article itself is not reproduced here.

    Remedy
    Truck Issues — Fix It Right the First Time (new issues in bold) 2003-2005 Tahoe, Yukon, Escalade – Engine Vibration/Noise at Idle, Vibration Felt in Steering Wheel/Seat Reprogram PCM. Don’t align exhaust and/or hang weights. 05-06-01-006