GMC Yukon 2000–2006
Common on this vehicle:Vibration or shudderTyre failure (blowout, tread separation)NoiseWarning lightCorrosion or rustLeakAir conditioning or heaterABS activates (at low speed and the like)
Possible causes
Causes with no correction stated (3)
Causes the records name for which no check or repair is stated, in a technical document or in a record. Press one for the records that name it.
- Suspension, wheels and tires
- Tire: broken, leaking (2)Valve Stem: leaking (1)
- Transmission and driveline
- Axle Differential Seal: leaking (1)
The documents say what to doOnly records name itThe size of a node, the width of a link and the numbers are records matching this search, not likelihoods.
FaultCrate・GMC Yukon 2000–2006・Leak, Suspension, wheels and tires
Candidate cause (the documents say what to do)
Grease seen at front hub bearing seals (normal purge, do not replace)
The factory grease fill of the front bearing/hub assembly exceeds what is required for bearing lubrication over the life of the vehicle.
Some grease purges through the self-venting seals in the initial drive period and helps form a barrier against contamination.
What to do
- Replace the bearing only for visible seal damage, endplay over 0.005 in (0.13 mm), rough rotation or abnormal noise.
- If desired, grease that has migrated away from the immediate seal area can be wiped off.
Caution: Do not replace the bearing for grease purge.
What is needed
- Parts and materials
- Bearing (only for visible seal damage, endplay over 0.005 in (0.13 mm), rough rotation or abnormal noise)
- Labor time
- Not stated
- Special tools
- Not stated
- Scan tool
- Not stated
Only what the technical documents state. "Not stated" does not mean not needed.
In the records
- Bearing: replaced 1
See the evidence (2 technical documents, 1 records)
Passages of the technical documents
The bulletin covers 2004-2013 GMC Sierra, Sierra Classic, Yukon and Yukon Denali models.
2004-2013 GMC Sierra, Sierra Classic, Yukon and Yukon Denali Models
General Motors (published by NHTSA) 2012-10-29
The factory grease fill of the front bearing/hub assembly exceeds what is required for bearing lubrication over the life of the vehicle.
The factory grease fill of the front bearing/hub assembly exceeds the amount of grease that is required for adequate bearing lubrication throughout the life of the vehicle.
General Motors (published by NHTSA) 2012-10-29
Some grease purges through the self-venting seals in the initial drive period and helps form a barrier against contamination.
A portion of the grease will purge through the self-venting bearing seals for the initial drive period (a few thousand miles/kilometers) and helps to form an additional barrier to block contamination of the bearing.
General Motors (published by NHTSA) 2012-10-29
Do not replace the bearing for grease purge.
Do not replace the bearing for grease purge.
General Motors (published by NHTSA) 2012-10-29
Manufacturer’s documents
- Front hub bearing grease leakage preliminary information PIT3078F 2017-08-15
A cause or a result a complaint states is the owner’s view or what a dealer told them, not an established fact.
Put together by FaultCrate from public records and technical documents. The cause and the repair are for the workshop to decide with the vehicle in front of it. Counts are records, not failure rates.