Skip to content
FaultCrate

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
3 conditions added

Common on this vehicle:Warning lightMisfire or rough idleLeakNoiseGauge or instrument faultDoes not startHard start or long crankLoss of engine power, no acceleration

Possible causes

Causes with no correction stated (1)

Causes the records name for which no check or repair is stated, in a technical document or in a record. Press one for the records that name it.

The documents say what to doOnly records name itThe size of a node, the width of a link and the numbers are records matching this search, not likelihoods.

Candidate cause (the documents say what to do)

Engine Valve: clogged or contaminated

1 of the records matching this search name this component as the cause.

How to tell

P0300P0308Check engine / Service Engine Soon

What to do

  1. With the engine cold, compression on multiple cylinders may read 0 PSI (= 0 kPa).
  2. The engine may pop through the intake or exhaust while cranking, and the spark plugs may be fuel fouled.
  3. If there is valve damage or cam followers are out of place, make the mechanical repairs first, then perform the cleaning procedure to keep the concern from returning.
  4. With the engine at operating temperature, slowly induce a bottle of GM Upper Engine and Fuel Injection Cleaner with RPM held above idle so the engine does not stall (typically around 2,000 RPM).
  5. Turn the engine off and let the cleaner soak for 2.5 to 3 hours.
  6. To complete the repair, change the engine oil and filter.

What is needed

Parts and materials
  • GM Upper Engine and Fuel Injector Cleaner 88861803 (in Canada 88861804; qty 1; decarboning when SI diagnosis leads to a valve sealing concern from carbon or sticking valves)
  • Fuel System Treatment Plus 88861013 (in Canada 88861012; qty 1; added to the fuel tank)
  • Engine oil 6 qt. and engine oil filter, qty 1 (see Parts Catalog; the oil and filter are changed to complete the repair)
Labor time
  • 4080148: Decarbon Engine Using Upper Engine Cleaner, 0.5 hr
  • Add: Change Engine Oil and Filter, 0.3 hr
Special tools
  • Kent Moore Tool J-45076 / J-35800-A or equivalent (suggested for inducing the cleaner through the throttle body)
Scan tool
Not stated

Only what the technical documents state. "Not stated" does not mean not needed.

From: PIP5029F

In the records

  • Engine Valve: cleaned 1
See the evidence (1 technical documents, 1 records)

Manufacturer’s documents

Records

None among the records that can be opened now.

See all 1 records of this cause →

A cause or a result a complaint states is the owner’s view or what a dealer told them, not an established fact.