Skip to content
FaultCrate
日本語

This is an open preview: every record can be read without an account.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
Add conditions (optional: symptom, model year, system, warning display, trouble code, kind of record)

Common on this vehicle:Corrosion or rustParking brakeReduced brakingLeak

causeEmergency Brake CableRemove

Record by record

2 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Symptom

Component named as the cause

A ribbon is as wide as the records that state both of its ends (only the commonest are drawn). A record that names several symptoms or components runs through each. Orange is records that say the fault came back or was not fixed. Results come from owners’ reports only; one that does not say is “result not stated”. None of this is a likelihood of a cause or a rate at which work succeeds.

Read the records one by one (2)

Known issuesBrake pipe (brake line) corrosion and rupture2

  1. Owner complaint2001 GMC YUKON ・ 2014-11-16

    Complete brake failure while backing into driveway

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

      Not stated

      What the documents say to do

      Brake pipe (brake line) corrosion and rupture

      Confirm

      • In the joint inspections, scaling or flaking corrosion was taken as indicating the onset of metal loss and given the second lowest ranking (2); a leaking or previously repaired pipe was the lowest (1).

      Repair

      1. GM recommends replacing the entire set of pipes whenever any pipe leaks or is corroded enough to need replacement.
      2. On June 28, 2013 GM released 66 new part numbers for servicing brake pipes in 1999-2007 GMT800 pickups and utility vehicles.

      Caution

      • Analysis of repair records indicates that consumers often elect to repair only the failed circuit.
    Read the sentences of the record
    Fault
    WHILE SLOWLY BACKING THE CAR INTO DRIVEWAY THE BRAKES FAILED COMPLETELY. (1 more)
    Cause
    THE E-BRAKE CABLE FAILED BECAUSE OF RUST AND THE BRAKE LINES TO THE EBCM WHERE THEY GO OVER FRAME ALL FAILED.
    Consequence
    WHEN THE BRAKES (E-BRAKE AND BOTH LINES) ALL FAILED THE CAR ROLLED OUT OF CONTROLLED INTO A TREE. (1 more)

  2. Owner complaint2002 GMC YUKON ・ 2012-10-23

    Brake lines severely rusted; brake pedal to floor while driving

    1. 1Fault

    2. 2Finding the cause

    3. 3Correction

      Not stated

      What the documents say to do

      Brake pipe (brake line) corrosion and rupture

      Confirm

      • In the joint inspections, scaling or flaking corrosion was taken as indicating the onset of metal loss and given the second lowest ranking (2); a leaking or previously repaired pipe was the lowest (1).

      Repair

      1. GM recommends replacing the entire set of pipes whenever any pipe leaks or is corroded enough to need replacement.
      2. On June 28, 2013 GM released 66 new part numbers for servicing brake pipes in 1999-2007 GMT800 pickups and utility vehicles.

      Caution

      • Analysis of repair records indicates that consumers often elect to repair only the failed circuit.
    Read the sentences of the record
    Fault
    BRAKE LINES SEVERELY RUSTED. (2 more)