Source reference 10216361
Manufacturer communication — 2006 GMC YUKON
Relation to the target vehicle
- The source's vehicle field says Yukon; whether it is an XL is not stated.
- The trim (Denali) is not stated.
- Model year
- Match 2006 — Source vehicle field
- Model
- Unknown YUKON — Source vehicle field
- Trim
- Unknown
What the manufacturer’s document says
PIT5099F ・ fault and correction ・ for GM vehicles in general
Applies to
Applies to all brands and models, 2000 - 2021.
the passage
All All 2000 - 2021 All All All All
Fault
The customer may comment that the A/C blows warm or performs poorly.
the passage
Customer may comment that there A/C blows warm or they have poor A/C performance.
Finding the cause
Steps to confirm (in the document’s order)
Record the A/C high and low pressures, the high side sensor reading and the A/C compressor duty cycle.
the passage
* A/C High and Low pressures * High side sensor reading * A/C compressor duty cycle
Record the outside temperature, the humidity and the vent temperature.
the passage
* Outside temperature * Humidity * Vent temperature
With an automatic HVAC system, read with the scan tool the evaporator temperature sensor (if equipped), the inside and outside temperature sensors and the duct temperature sensors.
the passage
If the unit is equipped with an Automatic HVAC system, go into the HVAC data with the scan tool and get the following readings: * Evaporator temperature sensor reading (if equipped) * Inside temperature sensor reading * Outside temperature sensor reading * Duct temperature sensor readings
Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.
Stated content
Communication summary
本プレミナリーインフォメーション通知は、ヒーターベントエアコンが温風を吹出する車両に関する整備士向け情報を提供するものです。ゼネラルモーターズテクニカルアシスタンスセンター整備士に連絡する前に、高圧側圧力、低圧側圧力、外気温、湿度、およびベント温度を確認する必要があります。 Machine translation (unreviewed)
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
Go to this passage in the original
Source
- Source
- NHTSA Manufacturer Communications
- Source reference
- 10216361
- Received by source
- 2022-07-25
- Incident date
- Unknown
Open original text and sourceOpen the provider's page (external)