Skip to content
FaultCrate

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

Selected vehicle: 2006 · GMC Yukon XL Denali

Change vehicle →

← Back to cases

Source reference 10135218

Manufacturer communication — 2006 GMC YUKON DENALI XL

Fitment confirmedReporter type: ManufacturerEQUIPMENT

Relation to the target vehicle

  • The source's vehicle field includes the trim.
Model year
Match 2006 — Source vehicle field
Model
Match YUKON DENALI XL — Source vehicle field
Trim
Match Denali — Source vehicle field

What the manufacturer’s document says

02-08-42-001G ・ information ・ for GM vehicles in general

Applies to

  • Applies to 2015 and earlier GM passenger cars and trucks.

    the passage
    Models: 2015 and Prior GM Passenger Cars and Trucks

Fault

  • Impact damage most often shows up as a lamp assembly that holds moisture, is inoperative, or is blemished.

    the passage
    Impact Damage is most often presented as the assembly is holding moisture, is inoperative, or blemished.

Finding the cause

Possible causes

  • A variety of chemicals can cause crazing or cracking of the polycarbonate lens.

    the passage
    A variety of chemicals can cause crazing or cracking of the polycarbonate lens.

Steps to confirm (in the document’s order)

  1. Broken mounting tabs, rear housing fractures and loose components inside the lamp assembly are evidence of impact damage.

    the passage
    Broken mounting tabs, rear housing fractures, and loose components inside the lamp assembly are evidence if impact damage.
  2. The most reliable way to identify a non original-equipment lamp is to compare it with the replacement service part or a like vehicle.

    the passage
    The most reliable way to identify a non OE part is to compare it to the replacement service part or a like vehicle.

Correction

Repair

  • Clean exterior lamps and lenses only with lukewarm or cold water, a soft cloth and a car washing soap.

    the passage
    Warning: Use only lukewarm or cold water, a soft cloth and a car washing soap to clean exterior lamps and lenses.

Caution

  • Rubbing compound, grease/tar/oil removers, tire cleaners, prep solvents for pin striping, cleaner/waxes, undiluted washer solvent, alcohol and car wash soaps in too high a concentration may also damage the lens.

    the passage
    Also rubbing compound, grease/tar/oil removers, tire cleaners, prep solvents for pin stripping, cleaner/waxes, undiluted washer solvent, alcohol and even car wash soaps in too high a concentration may also damage the lens.
  • Crazing or deformation of the lens may occur if a shop mat or fender cover covers part or all of the headlamp assembly while the DRL or headlamps are on.

    the passage
    Crazing or deformations of the lens may occur if a shop mat or fender cover is draped over the fender and covers a portion or all of the headlamp assembly while the DRL or headlamps are on.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

  1. Communication summary

    本情報通知は、保証対象外と判断される問題の識別を支援するためのものです。 Machine translation (unreviewed)

    This informational bulletin is to assist with the identification of issues that are not considered warrantable.
    Go to this passage in the original

Source

Source
NHTSA Manufacturer Communications
Source reference
10135218
Received by source
2018-05-07
Incident date
Unknown

Open original text and sourceOpen the provider's page (external)