Skip to content
FaultCrate

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

Selected vehicle: 2006 · GMC Yukon XL Denali

Change vehicle →

← Back to cases

Source reference 10133130

Manufacturer communication — 2006 GMC YUKON DENALI XL

Fitment confirmedReporter type: ManufacturerSTRUCTURE:BODY

Relation to the target vehicle

  • The source's vehicle field includes the trim.
Model year
Match 2006 — Source vehicle field
Model
Match YUKON DENALI XL — Source vehicle field
Trim
Match Denali — Source vehicle field

What the manufacturer’s document says

08-08-51-002A ・ information ・ for GM vehicles in general

Applies to

  • Applies to 2013 and prior GM passenger cars and trucks.

    the passage
    Models: 2013 and Prior GM Passenger Cars and Trucks

Fault

  • All fascias except those of the Corvette, Camaro and Cadillac XLR are made of TPO.

    the passage
    All fascias, with the exception of the Corvette, Camaro and Cadillac XLR, are made of TPO.

Finding the cause

Steps to confirm (in the document’s order)

  • If unsure of the plastic type, look for the plastic symbol (TPO) on the back of the part.

    the passage
    If the technician has a question as to the type of plastic they are painting, inspect the back of the part for the plastic symbol (TPO).

Correction

Repair

  1. Wash with soap and water, then clean with a 50% mix of isopropyl alcohol and water (or a waterborne cleaner).

    the passage
    1. Wash with soap and water. 2. Clean with a 50% mix of isopropyl alcohol and water (or a waterborne cleaner).
  2. Scuff sand as the paint supplier recommends, then reclean with the 50% mix of isopropyl alcohol and water (or a waterborne cleaner).

    the passage
    3. Scuff sand per your paint supplier's recommendations. Note: The use of a solvent-type cleaner will soften, or begin to dissolve, the primer. Base coats do not have any affect on this primer. 4. Reclean with a 50% mix of isopropyl alcohol and water (or a waterborne cleaner).

Caution

  • A solvent-type cleaner will soften or begin to dissolve the primer; base coats do not affect this primer.

    the passage
    Note: The use of a solvent-type cleaner will soften, or begin to dissolve, the primer. Base coats do not have any affect on this primer.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

  1. Communication summary

    本技術情報通知は、TPO樹脂フェイシアの塗装前処理及び清掃工程に関する情報を提供するものである。 Machine translation (unreviewed)

    This informational bulletin provides information pre-painting/cleaning process for TPO plastic fascias.
    Go to this passage in the original

Source

Source
NHTSA Manufacturer Communications
Source reference
10133130
Received by source
2018-04-16
Incident date
Unknown

Open original text and sourceOpen the provider's page (external)