Skip to content
FaultCrate
日本語Open preview: everything readable

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

Selected vehicle: 2006 · GMC Yukon XL Denali

Change vehicle →

← Back to cases

Source reference 10129057

Manufacturer communication — 2006 GMC YUKON DENALI

ReferenceReporter type: ManufacturerCOMMUNICATIONFUEL SYSTEM, OTHER:DELIVERY:HOSES

Relation to the target vehicle

  • The source's vehicle field says Yukon; whether it is an XL is not stated.
Model year
Match 2006 — Source vehicle field
Model
Unknown YUKON DENALI — Source vehicle field
Trim
Match Denali — Source vehicle field

What the manufacturer’s document says

PIP3343F ・ fault and correction ・ names this vehicle

Applies to

  • Applies to GMC Yukon models, 2002 - 2014, with a V8 engine.

    the passage
    Yukon Models 2002 - 2014 All All V8 All

Fault

  • An oil leak may appear shortly after a cold start in extremely low ambient temperatures (approximately below 10*F) or with excessive short trip drive cycles.

    the passage
    Some customers may complain of an oil leak shortly after a cold start when extremely low ambient temperatures are present (approximately below 10*F), or excessive short trip drive cycles.

Finding the cause

Possible causes

  • An oil leak from the rear main seal is the result of a frozen PCV system and excessive crankcase pressure.

    the passage
    If an oil leak from the rear main seal is noted, this is the result of a frozen PCV system and excessive crankcase pressure.

Correction

Repair

  1. Clean the area of the oil leak, clean and dry the PCV hoses, and replace the oil fill cap with part number 12589430 (vented oil fill cap) to prevent a reoccurrence.

    the passage
    If this concern is encountered, clean the area of the oil leak, clean and dry the PCV hoses, and replace the oil fill cap with part number 12589430 (vented oil fill cap) to prevent a reoccurrence.

  2. For warranty repairs, labor operation 4065230 is Oil Filler Cap Replacement.

    the passage
    4065230 Oil Filler Cap Replacement Use Published Labor Operation Time

Part numbers printed in the document

The numbers are as the document prints them. The name and the replacing number are what the pages of GMPartsGiant, a reseller of genuine parts and not GM, state. Aftermarket equivalents are not checked here (the links only search by number). Confirm the fit for the vehicle (VIN) before ordering.

Parts

  • Oil fill cap part number 12589430 (vented oil fill cap).

    the passage
    replace the oil fill cap with part number 12589430 (vented oil fill cap)

Part numbers printed in the document

The numbers are as the document prints them. The name and the replacing number are what the pages of GMPartsGiant, a reseller of genuine parts and not GM, state. Aftermarket equivalents are not checked here (the links only search by number). Confirm the fit for the vehicle (VIN) before ordering.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

  1. Communication summary

    本予備情報通知は、極めて低い周囲温度下で冷始始後まもなくオイル漏れが発生する車両についての情報を提供するものです。技術者は、オイル漏れの箇所を清掃し、PCVホースを清掃・乾燥させ、オイルフィラキャップを部品番号12589430のものと交換する必要があります。 Machine translation (unreviewed)

    This Preliminary Information communication provides information to the technician about vehicles that have an oil leak shortly after a cold start when extremely low ambient temperatures are present. Technician will need to clean the area of the oil leak, clean and dry the PCV hoses, and replace the oil fill cap with part number 12589430.
    Go to this passage in the original

Source

Source
NHTSA Manufacturer Communications
Source reference
10129057
Received by source
2018-02-21
Incident date
Unknown

Open original text and sourceOpen the provider's page (external)

Manufacturer communication 10129057 — 2006 GMC YUKON DENALI | FaultCrate