Manufacturer communication — 2006 GMC YUKON DENALI XL

• Applies to 2014 and prior GM cars and trucks.

  the passage

  2014 and Prior GM Cars and Trucks

• When an engine is replaced for internal damage, take extreme care when transferring the intake manifold to the new Genuine GM Part service engine long block.

  the passage

  When replacing an engine due to internal damage, extreme care should be taken when transferring the intake manifold to the new Genuine GM Part service engine long block.

Possible causes

• The internal damage may have discharged debris from engine components into the intake manifold through broken pistons and/or bent, broken or missing intake valves.

  the passage

  The internal engine damage may have resulted in the potential discharge of internal engine component debris into the intake manifold via broken pistons and/or bent, broken, or missing intake valves.

• Replacement is required because the complex runner and plenum shape of most intake manifolds makes thorough cleaning difficult and complete removal of debris nearly impossible to verify.

  the passage

  This replacement is required due to the complex inlet runner and plenum configuration of most of the intake manifolds, making thorough and complete component cleaning difficult and nearly impossible to verify the complete removal of debris.

Steps to confirm (in the document’s order)

• After removing the intake manifold, inspect all cylinder head intake ports to see that the valve heads are still present and not bent.

  the passage

  After removing the intake manifold from the engine, the technician MUST carefully inspect all of the cylinder head intake ports to see if the valve heads are still present and not bent.

Repair

• If debris is present in any cylinder head intake port, replace the intake manifold.

  the passage

  If this debris is present in any of the cylinder head intake ports, the intake manifold should be replaced.

Caution

• Reinstalling an intake manifold from an engine with debris deposits may let remaining debris be ingested into the new service engine.

  the passage

  Reinstallation of an intake manifold removed from an engine with deposits of internal engine component debris may result in the ingestion of any remaining debris into the new Genuine GM Part service engine.