Source reference 10114598
Manufacturer communication — 2006 GMC YUKON DENALI XL
Relation to the target vehicle
- The source's vehicle field includes the trim.
- Model year
- Match 2006 — Source vehicle field
- Model
- Match YUKON DENALI XL — Source vehicle field
- Trim
- Match Denali — Source vehicle field
What the manufacturer’s document says
PIC5491G ・ information ・ for GM vehicles in general
Applies to
2006-2015 GM passenger cars and trucks with OnStar (UE1).
the passage
Models: 2006-2015 GM Passenger Cars and Trucks With OnStar (UE1) Gen7, Gen8, Gen9, FCP1, or Gen10
Correction
Repair
With the issue present, turn off the ignition, cancel RAP, and perform a 5 minute power cycle of the VCIM.
the passage
With the issue present, turn off the ignition, cancel RAP, and perform a 5 minute power cycle of the VCIM.
Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.
Stated content
Communication summary
本予備情報通知は、起動しないOnStarシステムを装備した車両に関する情報を整備士に提供するものである。整備士はイグニッションをオフにして、保持されたアクセサリー電源をキャンセルする必要がある。車両が電源オフになった後、OnStarモジュールへの電源供給を五分間遮断する。電源が五分間遮断された後、OnStarシステムが作動している場合は車両をリリースする。OnStarシステムがまだ作動していない場合は、公開されたサービス情報診断を継続する。 Machine translation (unreviewed)
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics.
Go to this passage in the original
Source
- Source
- NHTSA Manufacturer Communications
- Source reference
- 10114598
- Received by source
- 2017-08-15
- Incident date
- Unknown
Open original text and sourceOpen the provider's page (external)
