Skip to content
FaultCrate
日本語Open preview: everything readable

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

Selected vehicle: 2006 · GMC Yukon XL Denali

Change vehicle →

← Back to cases

Source reference 10111966

Manufacturer communication — 2006 GMC YUKON DENALI XL

Fitment confirmedReporter type: ManufacturerELECTRICAL SYSTEMELECTRICAL SYSTEM:SOFTWARE

Relation to the target vehicle

  • The source's vehicle field includes the trim.
Model year
Match 2006 — Source vehicle field
Model
Match YUKON DENALI XL — Source vehicle field
Trim
Match Denali — Source vehicle field

What the manufacturer’s document says

PIC5491E ・ information ・ for GM vehicles in general

Applies to

  • Applies to 2006-2015 GM passenger cars and trucks with OnStar (UE1).

    the passage
    Models: 2006-2015 GM Passenger Cars And Trucks With OnStar (UE1) Gen7 Gen8 Gen9 And FCP1

Fault

  • The OnStar system will not power up, or no LED is lit and the OnStar button assembly does not respond.

    the passage
    A concern may be identified on a Gen7, Gen8, Gen9, or FCP1 VCIM as OnStar system will not power up or no led lit and no response from the OnStar button assembly.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

  1. Communication summary

    本予備情報通知は、起動しないOnStarシステムを搭載した車両についての情報を整備士に提供します。整備士はイグニッションをオフにして保持されたアクセサリー電源をキャンセルする必要があります。車両が電源オフになった後、OnStarモジュールへの電源を五分間遮断してください。電源が五分間遮断された後、OnStarシステムが作動している場合は車両をリリースしてください。OnStarシステムがまだ作動していない場合は、公開されているサービス情報診断を継続してください。STID、ステーションID、またはOnStarカスタマー識別番号によっては、整備士がGM技術支援センターに連絡する必要がある場合があります。 Machine translation (unreviewed)

    This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics. Technician may need to contact General Motors Technical Assistance Center depending on the STID, Station ID, or OnStar Customer Identifier.
    Go to this passage in the original

Source

Source
NHTSA Manufacturer Communications
Source reference
10111966
Received by source
2017-08-15
Incident date
Unknown

Open original text and sourceOpen the provider's page (external)