本文へ移動
FaultCrate

公開準備中のため、いまは登録なしですべての記録を閲覧できます。プランの詳細は準備中です。

選択中の車種: 2006 · GMC Yukon XL Denali

車種を変更 →

← 症例一覧へ

情報源での番号 10239102

メーカー通知 — 2006 GMC YUKON DENALI XL

適合を確認報告者の区分: メーカー電装系

対象車両との関係

  • 情報源の車種欄にグレードが含まれています。
モデル年
一致 2006 — 情報源の車種欄
車種
一致 YUKON DENALI XL — 情報源の車種欄
グレード
一致 Denali — 情報源の車種欄

メーカー文書の要点

13-08-116-001I ・ 不具合と対処 ・ GM 車全般向け

対象

  • 2024年式以前のGM乗用車・トラックが対象。

    原文の該当箇所
    Models: 2024 and Prior GM Passenger Cars and Trucks
  • フルサイズトラック、フルサイズバン、その他のフリート車両を主に想定しているが、どの車両にも当てはまりうる。

    原文の該当箇所
    Note: This bulletin is being written with a focus on full size truck and full size van along with other fleet vehicles, but could apply to any vehicle.

故障の状態

  • バス(LAN)の通信が止まらず、バッテリー上がりになることがある。

    原文の該当箇所
    Bus or LAN traffic may stay active leading to a discharged vehicle battery.
  • 電子ブレーキ制御モジュール(EBCM)に診断コード(DTC)C0561が残り、トラクションコントロールの不具合になることがある。

    原文の該当箇所
    C0561 stored in the EBCM leading to a traction control issue.
  • エンジン警告灯(SES/MIL/CEL)が点灯し、U0100、U0101、U186B、U1862など通信系の診断コード(DTC)が多数入ることがある。

    原文の該当箇所
    SES, MIL or CEL light set and numerous DTC communication codes such as U0100, U0101, U186B and U1862.
  • 1回のキーサイクルの間、変速しないことがある(TCMがデフォルトモード)。

    原文の該当箇所
    Transmission may not shift for one key cycle (TCM in default mode).
  • メーターの指示が不安定になる、または表示がちらつくことがある。

    原文の該当箇所
    Erratic gauge readings or flickering displays.

原因の特定

考えられる原因

  • 監視用の機器や、社外品のクルーズコントロール、警察の速度測定機器(RADAR・LIDAR)などの電子機器が、挙げた症状の原因になることがある。

    原文の該当箇所
    Monitoring devices, along with other electronic accessories such as aftermarket cruise control, or police speed checking devices (RADAR or LIDAR) may cause one or more of the concerns listed above.

点検手順(文書の順)

  • SIの通常の診断で原因が見つからない場合は、診断コネクター(ALDL/DLC)に、追跡や整備時期管理のための機器が挿されていないか確かめる。

    原文の該当箇所
    If nothing else can be identified as the root cause of the issue after normal diagnostics as found in SI, check for a device plugged into the Assembly Line Diagnostic Link (ALDL) or Data Link Connector (DLC) for tracking and/or maintenance interval scheduling.

対処

修理

  1. 機器が車両にあれば、症状を再現させてから機器を外し、症状が消えるか確かめる。

    原文の該当箇所
    If SI diagnostics do not identify the source of the issue and if the device is available, attempt to duplicate the condition, and then remove the device to determine if the condition is eliminated.
  2. 機器を外しても症状が消えなければ、該当するサービス情報に従って診断を続ける。

    原文の該当箇所
    If the condition is not eliminated with the device removed, continue diagnosing the vehicle with the appropriate Service Information.

注意

  • 別の診断コネクターを持つ機器は、ハーネスごと見えない所に隠されていることがある。診断コネクターが純正の位置に無いことに気づきにくい。

    原文の該当箇所
    The rest of the harness along with the device can be placed out of sight hidden from the technician, who may not notice the diagnostic connector is not in the factory location.

文書の本文を読んでまとめたものです。各項目は原文の該当箇所に基づいています。作業の前に、下の出典から文書そのものをご確認ください。

記載内容

  1. 通知の要約

    本サービスブレテンの目的は、アフターマーケット製ALDL又はDLCインターフェースデバイスを、他の診断方法では特定できない複数の顧客の懸念の潜在的な原因として識別することである。 機械翻訳(未確認)

    The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
    原文の該当箇所へ

出典

情報源
NHTSA Manufacturer Communications
情報源での番号
10239102
情報源の受付日
2023-07-13
発生日
不明

原文と出典を開く提供元のページを開く(外部)

メーカー通知 10239102 — 2006 GMC YUKON DENALI XL | FaultCrate